作者：刘冠洲, 王颖, 丁超, 李锋
作者单位：江苏科技大学电子信息学院, 江苏 镇江 212003
关键词：结构光;正弦条纹;误差补偿;相位映射
摘要：
为减小结构光投影视觉测量系统中相位失真对测量结果的影响，基于最小二乘法和线性插值方法，建立实际光栅相位与理想光栅相位映射关系，并以此关系对投影条纹的相位误差进行校正。在校正过程中，为满足线性插值的单调性、有效性和唯一性，对所采集到的相位进行线性拉伸变换，使其覆盖全部投射相位值，并引入微调函数使其形成单调变化的相位序列。为验证该方法的有效性，搭建由摄像机、投影仪组成的光栅投影结构光三维测量系统。实验结果表明：该方法能够对投影仪生成的光栅条纹的非正弦畸变进行补偿和校正，并最终给出合理的相位测量结果。该方法简单可行，可用于实际结构光测量系统的校正。
Research on structured light phase error compensation based on phase mapping
LIU Guanzhou, WANG Ying, DING Chao, LI Feng
School of Electronics and Information, Jiangsu University of Science and Technology, Zhenjiang 212003, China
Abstract: To reduce the influence of phase distortion of structured light projection visual measurement system on measurement results, the mapping relationship between actual raster phase and ideal raster phase is established based on the least squares method and linear interpolation method, and then this relationship is adopted to correct the phase error of projection fringes. In order to satisfy the monotonicity, validity and uniqueness of the linear interpolation in the process of correction, linear stretch transformation is carried out for collected phase to cover all the projected phase values, and a trimming function is introduced to form a monotonic phase sequence. In order to verify the effectiveness of this method, a raster projection structured light 3D measurement system composed of camera and projector is designed. The test results indicate that the method can compensate and correct the non-sinusoidal distortion of the raster fringes generated by the projector, and give a phase measurement reasonable result eventually. This method is simple and feasible and can be used to correct structured light measurement system in practice.
Keywords: structured light;sinusoidal stripes;error compensation;phase mapping
2018, 44(4): 26-30 收稿日期: 2017-08-17;收到修改稿日期: 2017-09-22
基金项目: 国家自然科学基金项目（11574120）
作者简介: 刘冠洲(1994-),男,陕西凤翔县人,专业方向为视觉测量。
参考文献
[1] 张启灿,苏显渝,曹益平,等. 利用频闪结构光测量旋转叶片的三维面形[J]. 光学学报,2005,25(2):207-211.
[2] 岳宏,孙立新,蔡鹤皋. 基于结构光的机器人焊接实时图像处理方法的研究[J]. 机器人,1999,21(2):144-147.
[3] 刘今越,刘佳斌,郭志红,等. 一种基于面结构光的刀具三维测量系统[J]. 电子测量与仪器学报,2016,30(12):1884-1891.
[4] 李中伟. 基于数字光栅投影的结构光三维测量技术与系统研究[D]. 武汉:华中科技大学,2009.
[5] PORRAS-AGUILAR R, FALAGGIS K, RAMOS-GARCIA R. Error correcting coding-theory for structured light illumination systems[J]. Optics and Lasers in Engineering,2017,93:146-155.
[6] 唐巍,叶东,袁锋,等. 视觉测量系统中一种独立的畸变校正算法[J]. 光电子.激光,2013(2):308-315.
[7] KE F, XIE J, CHEN Y, et al. A fast and accurate calibration method for the structured light system based on trapezoidal phase-shifting pattern[J]. Optik-International Journal for Light and Electron Optics,2014,125(18):5249-5253.
[8] 许伟,陈晓波,习俊通. 结构光测量相位波动误差补偿方法研究[J]. 光学学报,2011,31(3):133-138.
[9] 周平,朱统晶,刘欣冉,等. 结构光测量中相位误差的过补偿与欠补偿校正[J]. 光学精密工程,2015,23(1):56-62.
[10] ZHANG W, CHEN Z, ZHANG R, et al. An absolute phase to world coordinates method for the defocusing structured light shape measurement system[J]. Optik-International Journal for Light and Electron Optics,2014, 125(22):6819-6825.
[11] SERT E, TASKIN D, ALKAN A. Three stepped calibration of structured light system with adaptive thresholding for 3D measurements[J]. Optik-International Journal for Light and Electron Optics,2015,126(24):5176-5181.
[12] PORRAS-AGUILAR R, FALAGGIS K. Absolute phase recovery in structured light illumination systems:Sinusoidal vs. intensity discrete patterns[J]. Optics and Lasers in Engineering,2016,84:111-119.
