您好,欢迎来到中国测试科技资讯平台!

首页> 《中国测试》期刊 >本期导读>基于测录波形的铁芯设备励磁特性转换方法探讨

基于测录波形的铁芯设备励磁特性转换方法探讨

3205    2019-02-28

免费

全文售价

作者:李特, 周国良, 金涌涛, 王少华, 于淼

作者单位:国网浙江省电力有限公司电力科学研究院, 浙江 杭州 310014


关键词:励磁特性;电流峰值;电流有效值;谐波


摘要:

为获得铁芯设备伏安特性向励磁特性的简便转换方法,该文从励磁特性定义出发,给出基于电流有效值、电压平均值的处理方法和基于电流峰值、电压平均值的处理方法,并针对其处理方法在铁芯饱和下的适用性、电流有效值法带来的误差进行分析。结果表明:随铁芯饱和程度加深,电流谐波含量增加,电流有效值法造成的误差增大。利用对放电线圈放电过程的仿真计算与试验测量,并对比不同方法所测励磁曲线用于计算结果,结果表明利用电流峰值法所得励磁特性比电流有效值法结果更适用于铁芯设备电磁暂态的计算分析。


Discussion on conversion method for excitation characteristic measurements of iron core equipment based on excitation waveform
LI Te, ZHOU Guoliang, JIN Yongtao, WANG Shaohua, YU Miao
State Grid Zhejiang Electric Power Research Institute, Hangzhou 310014, China
Abstract: In order to attain the simplified way of conversing the U-I curve to excitation characteristics curve, the methods based on the root mean square value of current with voltage mean value and peak value of current with voltage mean value were carried out. The adaptability of these methods for statured iron core and the deviation of the method using root mean square value of current were given. It is shown that the more harmonics the current contains, the larger the deviation value would be. Based on the test and simulation on the transient process of discharge core, the calculation results with different excitation characteristics from test with current peak value or root mean square value are compared with the measurement results, which indicate that the results using excitation characteristic acquired by current peak value fit the measurement results better, meaning the excitation characteristic acquired by current peak value is more appropriate for theoretical analysis.
Keywords: excitation characteristic;current peak value;current root mean square value;harmonics
2019, 45(2):54-58  收稿日期: 2017-11-20;收到修改稿日期: 2018-02-15
基金项目:
作者简介: 李特(1987-),男,浙江温州市人,工程师,硕士,主要从事高电压试验技术及绝缘技术研究
参考文献
[1] 刘影, 谢驰. 直流偏磁下变压器的铁心损耗分析研究[J]. 中国测试, 2017, 43(7):124-127
[2] 兰华, 王彬, 杨亮, 等. PT励磁特性对铁磁谐振的影响及检测研究[J]. 电测与仪表, 2010, 47(10):10-14
[3] 牛福生, 王学涛, 白丽梅, 等. 新型比磁化系数测定仪的研制及其数值模拟研究[J]. 中国测试, 2017, 43(6):60-64
[4] 王俊凯, 梁仕斌, 刘涛, 等. 铁磁元件励磁特性低频测量方法[J]. 电工技术学报, 2017, 32(10):168-173
[5] 电压互感器试验导则:JB/T 5357-2002[S].北京:中国计量出版社,2002.
[6] 互感器试验导则第1部分:电流互感器:GB/T 22071. 1-2008[S].北京:中国计量出版社,2008.
[7] 高压并联电容器用放电线圈:JB/T 8970-2014[S].北京:中国质检出版社,2014.
[8] 李铭轩. 基于ARM的发电机互感器伏安特性测试系统的设计与实现[D]. 北京:北京交通大学, 2007.
[9] 丁心志, 梁仕斌, 刘涛, 等. 基于双单片机的新型电流互感器综合特性测试仪的研制[J]. 电测与仪表, 2010, 47(6):69-72
[10] 李谦, 陈猷清, 王晓瑜, 等. 变压器和电磁式电压互感器铁心励磁特性转换方法的探讨[J]. 变压器, 1993, 12:10-13
[11] 蒋金, 周鹗. 利用正弦交流电源测量基本磁化曲线的方法[J]. 微特电机, 1989(5):1-5
[12] 李远松, 高博, 丁津津, 等. 特高压保护用电流互感器励磁特性现场测试[J]. 变压器, 2016, 53(7):73-76