作者：董了瑜, 王成然, 李志昂, 郑力文, 李镒宏, 周鑫

作者单位：中国测试技术研究院, 四川 成都 610021

关键词：微量水分;标准物质;放压试验;注射称量法

摘要：

该文介绍一种高压瓶装氮中微量水气体标准物质的制备方法。气瓶经过加热高真空抽洗后，充入经过纯化器进一步纯化的高纯氮气，使用光腔衰荡光谱水分仪分析稀释气充装过程引入的水分。通过模拟露点曲线和冷却曲线确定使用环境温度≥5 ℃时的最大充装压力，分别使用普通铝合金气瓶和内壁特殊处理的铝合金气瓶，采用注射称量法，制备得到100 μmol/mol的氮中水分气体标准物质，使用精密露点仪标准装置对其进行放压试验的考察。结果表明随着压力的降低，普通铝合金气瓶内水分量值变化明显，而内壁特殊处理的铝合金气瓶在使用过程中量值稳定可靠。

Preparation of trace water vapor in nitrogen gas reference material
DONG Liaoyu, WANG Chengran, LI Zhiang, ZHENG Liwen, LI Yihong, ZHOU Xin
National Institute of Measurement and Testing Technology, Chengdu 610021, China
Abstract: A method for preparation a high pressure cylinder gas reference material of water vapor in nitrogen at trace lever has been developed. The cylinders wrapped by heating jackets were totally evacuated and cleaned using a turbo molecular pump and filled with nitrogen, which was supplied from ultrahigh purity nitrogen cylinder and passed through a purifier, after that the water from dilution gas and filling process was measured by CRDs analyzer. The max filling pressure at ambient temperature ≥ 5℃ was confirmed through simulating dew-line and Joule-Thomson cooling curve, then 100 μmol/mol gas mixtures were prepared in normal aluminum cylinders and passivation treated internally cylinders using injection-gravimetric method. The pressure release test was investigated by precision dew point hygrometer standard, which indicated that water concentration was changed obviously in normal aluminum cylinder while more reliable and stable in passivation cylinder.
Keywords: trace water vapor;gas reference material;pressure release test;injection-gravimetric method
2023, 49(5):69-73  收稿日期: 2022-02-05;收到修改稿日期: 2022-04-17
基金项目: 四川省科研院所基本科研业务费（2021JDKY0001）
作者简介: 董了瑜(1988-),女,四川达州市人,助理研究员,硕士,主要从事气体标准物质研制和分析测试工作
参考文献
[1] BREWER P J, GOODY B A, WOODS P T, et al. A dynamic gravimetric standard for trace water[J]. Review of Scientific Instruments, 2011, 82(10): 105102
[2] 质子交换膜燃料电池汽车用燃料氢气: GB/T 37244—2018[S]. 北京: 中国质检出版社, 2018.
[3] 气体分析 微量水分的测定 第1部分: 电解法: GB/T 5832.1—2016[S]. 北京: 中国质检出版社, 2016.
[4] 气体分析 微量水分的测定 第2部分: 露点法: GB/T 5832.2—2016 [S]. 北京: 中国质检出版社, 2016.
[5] 周鑫, 周泽义. 光腔衰荡光谱法测定气体中微痕量水不确定度评估[J]. 计量学报, 2012, 33(2): 178-180
[6] 胡树国, 陈安. 微痕量水分标准发生系统的研制[J]. 化学分析计量, 2018, 27(3): 99-103
[7] BREWEW P J. International pilot study CCQM-P193: 10 μmol/mol water vapor in nitrogen[R], 2018.
[8] BREWEW P J. International comparison CCQM-K116: 10 μmol/mol water vapor in nitrogen [R], 2018.
[9] 方正, 周鑫, 霍玉朋, 等. 电子质量比较器在重量法配气中的称量不确定度评定[J]. 中国测试, 2016, 42(12): 38-41
[10] 周鑫, 李志昂, 董了瑜, 等. 注射称量法配气中的称量线性研究及不确定度评定[J]. 化学试剂, 2017, 39(5): 505-508
[11] 郑力文, 杨嘉伟, 周鑫, 等. 环境监测用氮气中多组分VOCs标准物质的研制[J]. 中国环境监测, 2019, 35(1): 129-134
[12] 聂巍, 周鑫, 董了瑜, 等. 三聚甲醛制备瓶装甲醛气体标准物质的研究[J]. 中国测试, 2020, 46(8): 70-75
[13] 董了瑜, 曹文广, 王 凯, 等. 氮中甲硫醇、甲硫醚、二甲基二硫醚混合气体标准物质的研制[J]. 中国测试, 2020, 46(5): 57-64
[14] GRENFELL R J P, MILTON M J T, HARLING A M, et al. Standard mixtures of ambient volatile organic compounds in synthetic and whole air with stable reference values[J]. Journal of Geophysical Research, 2010, 115: D14302
[15] 方正, 周鑫, 李志昂, 等. 定量环法制备气体标准物质[J]. 天然气工业, 2018, 38(9): 114-120
[16] Gas analysis-Preparation of calibration gas mixture-Part 1: Gravimetric method for Class I mixtures: ISO 6142-1[S]. Switzerland, 2015.