作者：赵自文, 徐毓雄, 严宜强
作者单位：中国空空导弹研究院, 河南 洛阳 471000
关键词：空空导弹;地面检测设备;校准系统;测控平台;校准适配器
摘要：
现阶段空空导弹地面检测设备仅能实现分单元单物理量参数的校准，为解决空空导弹产品综合参数校准需求，提出基于系统模拟空空导弹产品测试参数、模拟空空导弹产品电气测试接口、模拟空空导弹产品测试流程的校准方法，通过分析空空导弹产品参数及接口特征，设计公共基础校准测控平台和独立校准适配器，采用校准测控平台和校准适配器组合架构研制一套空空导弹地面检测设备校准系统，提升校准系统的通用性和扩展性，满足不同型号空空导弹产品参数的模拟校准。校准系统经现场验收测试，测试结果满足系统技术指标要求，校准系统已应用于空空导弹地面检测设备的现场原位校准，实现空空导弹产品综合参数校准。
Research on calibration method for ground test equipment of airborne missile
ZHAO Ziwen, XU Yuxiong, YAN Yiqiang
China Airborne Missile Academy, Luoyang 471000, China
Abstract: At present, airborne missile ground test equipment is only capable of calibrating each unit and physical quantity parameters separately. In order to solve the calibration problems of comprehensive technical parameters of airborne missile products, a calibration method based on system simulation of airborne missile product test parameters, electrical test interface and test process is proposed. By analyzing airborne missile product parameters and interface features, designing public foundation calibration, measurement and control platform and independent calibration adapters and adopting calibration, measurement and control platform and calibration adapters combination architecture, an airborne missile ground test equipment calibration system is researched and developed to improve the versatility and extensibility and meets simulation calibration requirements of technical parameters of different models of airborne missile. After field acceptance and test, the calibration system results meet technical specification requirements and the calibration system has been applied to in-situ calibration of airborne missile ground test equipment, which realizes the comprehensive parameters calibration of airborne missile products.
Keywords: airborne missile;ground test equipment;calibration system;measurement and control platform;calibration adapter
2017, 43(12): 63-68 收稿日期: 2017-04-08;收到修改稿日期: 2017-06-15
基金项目: “十二五”国防技术基础研究项目（J052012B008）
作者简介: 赵自文(1966-),男,河南洛阳市人,研究员,硕士,主要从事型号计量技术研究和校准设备研制工作。
参考文献
[1] 张华锋,李涛,林涛. 基于VI的通用测试方舱计量检定系统设计[J]. 电子测量技术,2008,31(10):93-96.
[2] 王卫华,于建华,江峰. 某型导弹专用测试设备检定系统设计[J]. 宇航计测技术,2012,32(5):65-67.
[3] 刘琪,孟庆虎,张从霞. 并行测试技术在空空导弹检测中的应用浅析[J]. 2010,30(1):8-10.
[4] 孙宝江,沈士团,陈星. 自动测试系统校准方法研究[J]. 宇航计测技术,2007,27(1):30-34.
[5] 陈蕾,姜文盛,张航. 专用测试设备的通用化应用[J]. 测控技术,2008,27(3):14-16.
[6] 刘振吉,傅煊,底健. 检定专用测试设备的通用计量系统设计[J]. 中国测试技术,2008,34(6):8-11.
[7] HOOPER R, SHUFFIELD D, MERCHANT K, et al,Common RF test platform[C]//IEEE Autotestcon,2011:40-46.
[8] 苟铖,何玉珠. 某型导弹控制舱自动测试系统设计[J]. 电子测量技术,2015,38(4):109-112.
[9] 路辉,路子旺,杜志俊. 飞参系统专用地面检测设备校准装置设计[J]. 计算机工程与设计,2013,(7):2575-2579.
[10] 孙宝江,秦红磊,胡文明. 自动测试系统适配器自动设计技术[J]. 航空学报,2007,28(3):702-707.
[11] LEMON R, COULTER B. Interface test adapter develo-pment & maintenance using a continuity/insulation auto-matic test station in large scale test systems[C]//Anahe-im,CA. IEEE Autotestcon,2009:107-112.
