作者：刘浩浩1, 殷鸣1, 王宗平2, 欧登荧1, 谢罗峰1, 殷国富1,2
作者单位：1. 四川大学机械工程学院，四川 成都 610065;
2. 四川大学空天科学与工程学院，四川 成都 610065
关键词：线结构光;叶片光学检测;型面检测;型线检测;数据拼接
摘要：
叶片是燃气轮机和航空发动机的核心部件，随着我国两机行业的高速发展，对于叶片在研发、生产和维修等方面全生命周期检测的要求不断提高。光学测量是目前叶片三维形貌高效检测的新手段，但是在测量精度等方面相比传统三坐标测量机仍存在一定局限。该文提出一种基于线结构光的叶片型面特征检测方法，设计开发一套四自由度检测平台，针对基于标定物的平台位姿校准和数据采集方法开展研究，并以某气轮机导向叶片为检测对象进行实验测试。测试数据与精密三坐标测量机实测数据的对比结果表明：型面型线轮廓度偏差在±0.02 mm以内，截面主要特征参数偏差均在±0.018 mm以内，该文面向叶片型面实际检测需求的方法可行。
Research on feature detection method of blade surface based on line structured light
LIU Haohao1, YIN Ming1, WANG Zongping2, OU Dengying1, XIE Luofeng1, YIN Guofu1,2
1. School of Mechanical Engineering, Sichuan University, Chengdu 610065, China;
2. School of Aeronautics and Astronautics, Sichuan University, Chengdu 610065, China
Abstract: Blade is the core component of the gas turbine and the aeroengine. With the rapid development of the gas turbine and the aeroengine industry in China, the requirements of blade life cycle testing in research and development, production and maintenance are continuously increasing. At present, optical measurement is a new way to efficiently measure the three-dimensional shape of blade, but it still has some limitations in measuring accuracy by comparing with the traditional coordinate measuring machine(CMM). In this paper, a method of blade profile feature detection based on line structured light is proposed, and a set of four degrees of freedom detection platform is designed and developed. The methods of platform pose calibration and data acquisition based on calibrator are studied, and a gas turbine blade is tested. The comparison between the test data and the measured data of the precise CMM shows that the deviation of the profile line is within ±0.02 mm, and the deviation of the main characteristic parameters of the profile surface is within ±0.018 mm, which verifies the feasibility of the method proposed in this paper for the actual detection requirements of the blade profile.
Keywords: line structured light;blade optical detection;profile surface detection;profile line detection;data splicing
2021, 47(2):6-12 收稿日期: 2020-06-21;收到修改稿日期: 2020-07-21
基金项目: 中国制造2025四川行动资金项目（2018CD00225）；2018年国家工业强基工程项目（TC180A3Y1-22）；2018年智能制造新模式应用项目（2019QT-工信厅装函[2018]265）
作者简介: 刘浩浩(1996-),男,湖北潜江市人,硕士研究生,专业方向为叶片光学检测
参考文献
[1] 陆佳艳, 熊昌友, 何小妹, 等. 航空发动机叶片型面测量方法评述[J]. 计测技术, 2009, 29(3): 1-3
[2] HSU T H, LAI J Y, UENG W D. On the development of airfoil section inspection and analysis technique[J]. The International Journal of Advanced Manufacturing Technology, 2006, 30(1/2): 129-140
[3] HE W T, LI Z W, GUO Y Y, et al. A robust and accurate automated registration method for turbine blade precision metrology[J]. The International Journal of Advanced Manufacturing Technology, 2018, 97(9/12): 3711-3721
[4] 刘博文, 陈世利, 杨毅, 等. 基于多线激光扫描的叶片轮廓快速测量系统标定方法[J]. 纳米技术与精密工程, 2017, 15(6): 532-537
[5] LI W L, WU A, LI Z C, et al. A new calibration method between an optical sensor and a rotating platform in turbine blade inspection[J]. Measurement Science & Technology, 2017, 28(3): 035009
[6] FU Y, WANG Y, WAN M, et al. Three-dimensional profile measurement of the blade based on surface structured light[J]. Optik-International Journal for Light and Electron Optics, 2013, 124(18): 3225-3229
[7] 向志聪, 胡忠, 白玉磊, 等. 高精度测量燃气轮机叶片前缘的三维轮廓[J]. 航空动力学报, 2016, 31(7): 1761-1765
[8] SUN B, LI B. Laser displacement sensor in the application of aero-Engine blade measurement[J]. IEEE Sensors Journal, 2016, 16(5): 1377-1384
[9] 毕超, 王津, 李迪, 等. 基于光学扫描的叶片截面测量技术研究[J]. 航空制造技术, 2018, 61(15): 91-95
[10] 徐永安, 杨钦, 怀进鹏. 激光旋转扫描测量系统中转轴标定及多视拼合[J]. 中国激光, 2005, 32(5): 659-662
[11] KHAMENEIFAR F, FENG H Y. Airfoil profile reconstruction under the uncertainty of inspection data points[J]. The International Journal of Advanced Manufacturing Technology, 2014, 71(1/4): 675-683
