您好,欢迎来到中国测试科技资讯平台!

首页> 《中国测试》期刊 >本期导读>多路配电网络监测系统的一种设计方法

多路配电网络监测系统的一种设计方法

860    2016-01-23

免费

全文售价

作者:杨华荣, 许荣彧, 刘钢

作者单位:武汉第二船舶设计研究所, 湖北武汉 430064


关键词:信号; 数据; Delphi; 开发平台; 数据分离; 多路电网; 监测


摘要:

针对某船多路配电网络的监测系统,提出了一种经济、简洁的设计和实现方法。首先设计了用于自动切换各配电部位的自动信号切换装置,在此基础上,利用FLUKE 43电力质量分析仪测试电力品质参数,生成数据文件,在DELPHI开发平台上,根据文件中数据特征进行数据分离,得到各通道的实际测量结果,从而达到了利用单通道通用测试仪器监测多路通道的目的。


Design of monitoring system for multiplex power distribution networks

YANG Hua-rong, XU Rong-yu, LIU Gang

Wuhan Second Ship Design and Research Institute, Wuhan 430064, China

Abstract: Based on the monitoring system of multiplex power distribution networks of one ship, a cheap and succinct design and implementation method were described in this article. Firstly, the auto-switcher is designed for automatically switching the signal from one test position to the other. Then the power quality parameters were measured by power quality analyzer FLUKE43, and produce corresponding data files. Finally, the data were separated according to their characteristics, and the actual test result of each channel was acquired. As the result, multi-position system could be monitored with single channel instruments.

Keywords: Signal; Data; Delphi; Data separation; Multiplex power distribution networks; Monitoring

2008, 34(6): 96-99  收稿日期: 2008-3-7;收到修改稿日期: 2008-6-11

基金项目: 

作者简介: 杨华荣(1976-),男,四川成都市人,高级工程师,主要从事船舶电磁兼容设计、管理及测试研究。

参考文献

[1] 臧正保.电网高次谐波的影响及抑制[J].机械制造与自动化,2004,33(3):88-89.
[2] 郎维川.供电系统谐波的产生、危害及其防护对策[J].高电压技术,2002(6):30-31.
[3] 肖湘宁,徐勇海.电网谐波与无功功率有源补偿技术的进展[C].西安电力电子技术暨电力谐波问题研讨会论文集,2000.
[4] 张宏林,朱静,李玉国,等.DELPHI7程序设计与开发技术大全[M].北京:人民邮电出版社,2004.
[5] 刘经燕.测试技术及应用[M].广州:华南理工大学出版社,2001.
[6] 段兴,宋雷,张敬韶,等.DELPHI7控件实用程序设计100例[M].北京:人民邮电出版社,2003.
[7] 罗小平.Delphi精要[M].北京:电子工业出版社,2004.
[8] 方向东. 基于LabVIEW的电能质量自动监测系统[J]. 计算机自动化,2007,26(1):33-35.
[9] HJB237-2001,舰船电磁兼容性试验方法[S].解放军海军装备部,2001.
[10] 高育方,张茂青.基于虚拟仪器技术的电网谐波测试系统[J].电气制造,2007(1):74-75.