作者：胡开明, 李跃忠, 赵永科
作者单位：东华理工大学机械与电子工程学院, 江西 抚州 344000
关键词：流量标定; 组态王; Matlab软件; DDE技术
摘要：
在分析流量标定装置的标定原理与结构基础上,将标准表法和标准体积法综合在一套流量校准装置中,扩大了应用范围,提高了检定效率。完成恒压供水系统、数据采集、标准流量计及控制执行等电路的配置,建立系统的数学模型,进行Matlab仿真分析,采用组态王软件开发流量计检定系统,运用DDE技术完成了Matlab与组态间的动态数据交换,通过编程实现流量装置和流量计的检定、数据存储以及历史数据报表等功能,较好地实现在线实流校准的仿真。实验调试表明:流量计校准装置的准确度为0.3,能较好地实现流量校准系统的控制、数据采集、处理分析的自动化。
Design of flow meter calibration system based on configuration software and DDE technology
HU Kai-ming, LI Yue-zhong, ZHAO Yong-ke
College of Mechanical and Electronics Engineering, East China Institute of Technology, Fuzhou 344000, China
Abstract: The methods of master meter and standard table are integrated in a flow standard device after analyzing the principle and structure of the flow calibration standard device, which can expand application range and improve detection efficiency.The system has the functions of constant pressure water supply and data acquisition.And it is also equipped with the hardware circuits of the standard flow meter, the actuator, etc.The mathematical model is established, and Matlab simulation analysis is carried out.Flow meter calibration system is developed with the Kingview software.The dynamic data exchange between Matlab and configuration is realized with DDE technology.The functions of calibration, data storage, history data report, etc.are realized for the flow device and the flowmeter through programming.The method is a good way for on-line real-calibration simulation.Experimental results show that the accuracy of the flowmeter calibration device is 0.3, and it can preferably reach to the automation of control, data acquisition, processing and analysis.
Keywords: flow calibration; Kingview; Matlab; DDE technology
2013, 39(5): 65-67,79 收稿日期: 2012-8-30;收到修改稿日期: 2012-10-19
基金项目: 国家自然科学基金项目(61064013)
作者简介: 胡开明(1977-),男,安徽安庆市人,讲师,硕士,主要从事控制理论、检测与控制仪表装置领域的教学与研究工作。
参考文献
[1] 苏彦勋. 流量计量与测试仪表发展的趋势[J]. 电子仪器仪表用户,1999,6(1):46-48.
[2] 郭爱华. 标准表法气体流量标准装置[J].自动化仪表,2009,30(8):50-54.
[3] 符传伟. 水流量综合标准装置[J]. 中国测试技术,2004, 30(5):86-88.
[4] 关业伟,鲁凯生. 组态王和Matlab的DDE应用研究[J].船海工程,2005(6):50-52.
[5] Wang H X, An W P, Yuan X Q. The design for the developing environment of configuration software[J]. Advances in Computer Science, Intelligent System and Environment,2011(105):615-621.
[6] 于海生,丁军航. 微型计算机控制技术[M]. 2版. 北京:清华大学出版社,2009:237-238.
[7] 胡大斌,胡锦晖,吴峰. 基于组态王与Matlab的监控软件实现[J]. 武汉理工大学学报,2005,29(2):234-237.
[8] 董新利,王景景. 在控制系统中实现组态王与Matlab的DDE通讯[J]. 微计算机信息,2005,21(8):3-5.
[9] 胡开明,葛远香,傅志坚. 基于PLC与组态技术的液位控制系统的设计与实现[J]. 东华理工大学学报,2012, 35(3):67-70.
[10] 杨汉,袁中凡. 基于组态软件和PLC的机翼精加工水平测控系统[J]. 中国测试技术,2008,34(1):131-133.
