作者：雷霄1,2, 马铁华1,2, 裴东兴1,2, 崔光强3, 张士飞1,2
作者单位：1. 中北大学电子测试技术国家重点实验室, 山西 太原 030051;
2. 中北大学仪器科学与动态测试教育部重点实验室, 山西 太原 030051;
3. 中国水利水电第十四工程局股份有限公司, 云南 昆明 650041
关键词：井下; 复合射孔; 动态压力; 数据分析
摘要：
为深入研究井下复合射孔器工作机理,使用井下多参数记录仪,全面获取内置式复合射孔和外挂射孔两种完井工艺的井下动态压力数据并进行分析。通过对比两种完井工艺动态压力曲线,分析其工作机理的异同,并对全过程曲线规律进行归纳和总结。大量测试数据显示:复合射孔器的井下动压作用特性主要取决于复合火药装药量和起爆方式,对准确认识和定量分析复合射孔井下动态过程,提高复合射孔器设计水平具有决定性意义。
Dynamic pressure test and data analysis for downhole composite perforation
LEI Xiao1,2, MA Tie-hua1,2, PEI Dong-xing1,2, CUI Guang-qiang3, ZHANG Shi-fei1,2
1. National Key Laboratory for Electronic Measurement and Technology, North University of China, Taiyuan 030051, China;
2. Key Laboratory of Instrumentation Science & Dynamic Measurement of Ministry of Education, North University of China, Taiyuan 030051, China;
3. Sinohydro Bureau 14 Co., Ltd., Kunming 650041, China
Abstract: In order to thoroughly study the working mechanism of composite perforator, the downhole multi-parameter recorder was used to obtain the dynamic downhole pressure data of both the built-in composite perforation and plug-perforation completion techniques, and the data were analyzed. By comparing two kinds of dynamic pressure curve of well completion technology, the working mechanism of the similarities and differences was analyzed, and the whole process of curve pattern has been concluded and summarized. A large number of test data show that the downhole dynamic pressure effect of composite perforator features mainly depends on the composite powder charge and the way of initiation. It has decisive significance for accurately understanding and quantitatively analyzing the composite perforation downhole dynamic process, and for improving the level of composite perforator design.
Keywords: downhole; hybrid perforating; dynamic pressure; data analysis
2014, 40(2): 36-39 收稿日期: 2013-7-25;收到修改稿日期: 2013-9-15
基金项目: 山西省归国留学人员重点科研项目(2008003)
作者简介: 雷霄(1987-),男,山西晋中市人,硕士,专业方向为动态测试与智能仪器。
参考文献
[1] 李东传,金成福,刘权民,等. 复合射孔检测技术现状及其发展趋势[J]. 测井技术,2011,35(2):22-25.
[2] Schatz J F, Zeiglers B J, Hanson J M. Laboratory,computer modeling, and field studies of the pulse fracturing process[J]. SPE 18866,1989(3):327-350.
[3] Schatz J F. Improved modeling of the dynamic fracturing of rock with propellants[J]. Rock Mechanics,1992:305-312.
[4] Cuderman J F. High energy gas fracture experiments in fluid-filled boreholes-potential geothermal application[J]. Sandia Report Sand,1986(6):138-142.
[5] Cuderman J F. High-energy gas fracturing in cased and perforated wellbores[J]. Sandia Report Sand,1986(6):63-65.
[6] Burman J, Schoener-Scott M. Predicting wellbore dynamic-shock loads prior to perforating[J]. SPE,2011(4):78-82.
[7] 安丰春,杨玉玲. 大庆油田复合射孔工艺技术的研究与应用[J]. 兵工学报,2005(1):11-15.
[8] 陈锋,唐凯,程启文,等. StimGun复合射孔技术在四川地区的应用研究[J]. 测井技术,2010,34(6):35-39.
[9] 史慧生,王志信. 高效复合射孔技术[J]. 爆炸与冲击,2001,21(4):45-48.
