作者：赵三军1, 李博2, 林建国1, 罗俊1, 刘彦君1, 刘亚磊1, 段梦兰1
作者单位：1. 中国石油大学(北京)海洋油气研究中心, 北京 102249;
2. 中海油研究总院, 北京 100027
关键词：水下生产系统; 连接器; 性能; 合格性测试
摘要：
深水套筒式连接器,作为主要水下生产设施的连接,是水下生产系统的重要组成部分。为检测连接器的性能,参照相关标准,在分析连接器所处的环境和所受各种复杂载荷的基础上,提出深水套筒式连接器进行合格性测试的步骤,包括连接器外压测试、内压测试、弯曲测试和扭转测试等。合格性测试对进一步研究连接器的测试具有一定的参考价值。
Qualification testing for deepwater collet connector
ZHAO San-jun1, LI Bo2, LIN Jian-guo1, LUO Jun1, LIU Yan-jun1, LIU Ya-lei1, DUAN Meng-lan1
1. Offshore Oil and Gas Research Center, China University of Petroleum(Beijing), Beijing 102249, China;
2. CNOOC Research Institute, Beijing 100027, China
Abstract: Deepwater collet connector is one of the most important components in subsea production system. It is mainly used to connect the subsea production facilities. In order to detect the properties of the connector, reference to the relevant standards and based on the analysis of the environment and varieties of complex loads of the connector, qualification testing for deepwater collet connector were tentatively proposed, including external pressure testing, internal pressure testing, bending testing and torsion testing. The qualification testing can be referenced for further research on testing for connector.
Keywords: subsea production system; connector; properties; qualification testing
2014, 40(4): 26-29 收稿日期: 2013-12-7;收到修改稿日期: 2014-2-20
基金项目: 国家科技重大专项(2011ZX05026-003-02,2011ZX05027-004)
作者简介: 赵三军(1987-),男,河北泊头市人,硕士研究生,专业方向为海洋石油装备研究。
参考文献
[1] Allensworth D C, Crown T W. Subsea gang connector system:United States, US7172447 B2[P]. 2007-02-06.
[2] 王莹莹,王德国,段梦兰,等. 水下生产系统典型布局形式的适应性研究[J]. 石油机械,2012,40(4):58-63.
[3] 董衍辉,段梦兰,王金龙,等. 深水水下连接器的对比与选择[J]. 石油矿场机械,2012,41(4):6-12.
[4] Bonnissel M. Gel based materials for high insulation and long cool down time in deep water[C]//Offshore Technology Conference Houston Texas,2004.
[5] Hadfield P E, Balnaves C, Brookes D A, et al. DMaC:flowline and umbilical connections for commercial application[C]//Offshore Technology Conference Houston Texas,1994.
[6] Aleksandersen J. Autonomous subsea tie in system (AUSTIN) for large diameter pipelines in deep waters[C]//International Offshore and Polar Engineering Conference Stavanger Norway,2001.
[7] 谭磊. 水下管道卡压式连接器与连接机具关键技术研究[D].哈尔滨:哈尔滨工程大学,2012.
[8] 周游,段梦兰,郭宏,等. 深水水平套筒式连接器定位技术[J]. 石油矿场机械,2013,42(9):18-22.
[9] 王立权,安少军,王刚,等. 深水海底管道套筒连接器设计与分析[J]. 哈尔滨工程大学学报,2011,32(9):1103-1107.
[10] 安少军. 深水海底管道套筒连接器密封接触特性研究[D].哈尔滨:哈尔滨工程大学,2012.
[11] 梁稷,姚宝恒,曲有杰,等. 水下生产系统测试技术综述[J].中国测试,2012,38(1):38-40.
[12] ANSI/API SPECIFICATION 17D. Design and Operation of Subsea Production Systems-Subsea Wellhead and Tree Equipment[S]. 2011.
[13] ANSI/API SPECIFICATION 6A.Specification for Wellhead and Christmas Tree Equipment[S]. 2011.
