作者：陈桂生, 付志勇, 赵晶, 朱育红, 杨锐
作者单位：中国测试技术研究院, 四川 成都 610021
关键词：工业铂热电阻; 检定; 标准铂电阻; 电测仪器; 不确定度
摘要：
依据JJG 2292010《工业铂、铜热电阻》规定的技术条件,分别用标称电阻值Rtp为25和100的二等标准铂电阻温度计作标准,在电测仪器不同允差水平下,对Pt100铂热电阻检定结果的不确定度进行评定。研究结果表明:检定工业铂热电阻时,电测仪器的非线性误差和标准铂电阻温度计的正确选择对检定结果不确定度的影响很大。电测仪器与标准温度计的优化选用,既可减小检定结果的不确定度,提高检定结果的可信度,又可降低标准装置的设备成本。
Research on improving method of the credibility of industrial platinum resistance verification results at a low cost
CHEN Guisheng, FU Zhiyong, ZHAO Jing, ZHU Yuhong, YANG Rui
National Institute of Measurement and Testing Techology, Chengdu 610021, China
Abstract: Based on the technical conditions prescribed by verification regulation JJG 229——2010. Evaluation has been taken on the uncertainty of verification results Pt100 platinum thermal resistance, when second class standard platinum resistance thermometer as measuring standards which Rtp nominal resistance values were used for 25 Ω, 100 Ω and instruments at different levels of tolerance. The results show that: When the verification industrial platinum RTD, the correct choice of electrical measuring instruments nonlinearity error and standard platinum resistance thermometer, exert a great influence on the uncertainty of verification results. The optimization selection of Electrical measuring instrument with a standard thermometer, greatly reduce uncertainty of verification results and improve the reliability of verification results, at the same time reduces the cost on the equipment of standard device.
Keywords: industry platinum resistance; verification; standard platinum resistance; electrical measuring instruments; uncertainty
2015, 41(1): 24-28,36 收稿日期: 2014-8-16;收到修改稿日期: 2014-10-9
基金项目:
作者简介: 陈桂生(1953-),男,山东东明县人,研究员,主要从事温度计量技术研究。
参考文献
[1] JJG 229—1987工业铂、铜热电阻[S]. 北京:中国计量出版社,1988.
[2] JJG 229—1998工业铂、铜热电阻[S]. 北京:中国计量出版社,1998.
[3] JJG 229—2010工业铂、铜热电阻[S]. 北京:中国质检出版社,2010.
[4] 陈桂生,付志勇,朱育红,等. 工业铂热电阻不同检定方法检定结果的可信度研究[J]. 中国测试,2014(6):17-21.
[5] JJG 160—2007标准铂电阻温度计[S]. 中国计量出版社,2007.
[6] 沈正宇. 温度测量不确定度评定[M]. 中国计量出版社,2006:84-93.
[7] JJF 1059.1—2012测量不确定度评定与表示[S]. 北京:中国质检出版社,2012.
[8] JJF 1178—2007用于标准铂电阻温度计的固定点装置校准规范[S]. 北京:中国计量出版社,2007.
[9] 叶德培. 测量不确定度理解评定与应用[M]. 北京:中国质检出版社,2013:66-73.
