您好,欢迎来到中国测试科技资讯平台!

首页> 《中国测试》期刊 >本期导读>包装件在随机振动下的破损机理及相关量检测

包装件在随机振动下的破损机理及相关量检测

2781    2015-09-09

免费

全文售价

作者:江春冬, 武玉维, 杜太行, 李丙炜, 刘策

作者单位:河北工业大学控制科学与工程学院, 天津 300130


关键词:随机振动;振动疲劳;寿命估算;包装件;线性累积损伤理论


摘要:

为准确评估包装件的破损状态,改进包装设计,该文重点研究随机振动下包装件的破损机理以及振动信号的检测方法。提出一种采用线性累积损伤理论对包装件进行振动疲劳计算的新方法,并开发以MSP430F5529为系统主处理器的检测平台来检测计算中所需的相关量。最后通过实验证明此方法的可行性,为今后的包装设计提供参考。


Damage mechanism of the package under random vibration and the detection of relevant quantities

JIANG Chundong, WU Yuwei, DU Taihang, LI Bingwei, LIU Ce

School of Control Science and Engineering, Hebei University of Technology, Tianjin 300130, China

Abstract: In order to accurately assess the damage state of package and improve the design of it,this paper focuses on the study of damage mechanism of packages under random vibration and testing method for vibration signal.Coming up with a new idea that conducting the fatigue calculation of random vibration by linear cumulation theory and developing a set of equipment with MSP430F5529 processor to detect the relevant quantities.At the last, proving this method is feasible through experiments and providing reference for packaging design in the future.

Keywords: random vibration;vibration fatigue;life estimation;package;linear cumulation theory

2015, 41(8): 27-30  收稿日期: 2014-10-21;收到修改稿日期: 2014-12-16

基金项目: 河北省青年基金项目(F2014202264)

作者简介: 江春冬(1974-),女,吉林白城市人,讲师,博士,研究方向为智能算法、计算电磁场理论。

参考文献

[1] 王军,卢立新,王志伟. 产品破损评价及防护包装力学研究[J]. 振动与冲击,2010(8):43-45.
[2] Newton R E. Fragility assessment theory andpractice[R].Monterey Research Laboratory Inc Monterey Califonia,1968.
[3] Goodwin D L. Fatigue damage boundary an application using trapezoidal shock pulse to generate damage in nonlinear components[C]∥ IAPRI Symposium Valencia,2003.
[4] 刘龙涛,李传日,程祺,等. 某结构件的随机振动疲劳分析[J]. 振动与冲击,2013(21):97-101.
[5] 李超. 基于功率谱密度的疲劳寿命估算[J]. 机械设计与研究,2005(2):6-8.
[6] 周敏亮,陈忠明. 飞机结构的随机振动疲劳分析方法[J].飞机设计,2008(2):46-49.
[7] 吴启鹤,叶笃毅,杨英. 一种估算结构件随机疲劳寿命的新方法[J]. 工程力学,1995(2):87-94.
[8] 袁洪,张惠兴. 平稳信号功率谱密度的估计方法[J]. 昆明冶金高等专科学校学报,2011(3):45-47.
[9] 刘锐,王林. 基于ARM数据采集系统的设计[J]. 中国测试,2010(4):89-92.