作者：张易农, 彭静, 程耀华, 瞿蒙, 姚敏, 郑睿

作者单位：北京市计量检测科学研究院, 北京 100029

关键词：超声流量计;气液两相流;流型;质量法;计量

摘要：

超声流量计广泛应用于生活供排水、农业灌溉、工业生产等领域流体流量的计量。受实际工况影响，管道内流体的流态呈现复杂多变的特点，根据具体工况准确选择流量计对保证测量结果精度、流量计更换频率具有重要影响。针对实际工况中常出现的气液两相流流态下的流量精确测量问题，通过对单声道反射式、外夹式、三声道超声流量计在该流态状态下5个典型流量值附近进行测量，将检测量值同称重法流量标准装置测量值进行对比，实现各流量计计量特性评估。试验结果表明：不同类型的流量计有着不同的使用条件和范围，对其在实际工程中的应用具有重要的指导意义，为用户使用流量计选型提供参考依据。

Experimental study on gas-liquid two-phase flow measurement by using multiple ultrasonic flowmeter

ZHANG Yinong, PENG Jing, CHENG Yaohua, QU Meng, YAO Min, ZHENG Rui

Beijing Institute of Metrology, Beijing 100029, China

Abstract: Ultrasonic flowmeter is widely used for flow measurement in the fields of water supply and drainage, agricultural irrigation and industrial production. As the flow regime in pipes shows complex and changeable characteristics in practical application, the correct selection of flowmeter has important influence on measurement accuracy and flowmeter replacement frequency. To the problem of accurate flow measurement in the gas-liquid two-phase flow in practical application, the metrological characteristics of mono reflection-type, external clamp and three-channel ultrasonic flowmeters in the gas-liquid two-phase flow state are evaluated near the five typical flow values in this test. Finally, the metrological characteristics of the flowmeter are evaluated through comparing the measured values by the flowmeters with the measured values by standard device with weighing method. The research results show that different types of flowmeters have different service conditions and ranges and the research has very important guiding significance for actual applications and provides a reference basis for the user to select flowmeter.

Keywords: ultrasonic flowmeter;gas-liquid two-phase flow;flow pattern;weighing method;metrology

2017, 43(9): 143-147  收稿日期: 2017-01-05;收到修改稿日期: 2017-02-13

基金项目: 

作者简介: 张易农(1981-),男,北京市人,高级工程师,硕士,研究方向为流量和温度计量。

参考文献

[1] LYNNWORTH L C. Ultrasonic measurements for process control[M]. Boston:Academic Press,1989:167-172.
[2] SANDERSON M L, YEUNG H, SANDERSON M L, et al. Guidelines for the use of ultrasonic non-invasive metering techniques[J]. Flow Measurement and Instrumentation,2002,13(4):125-142.
[3] LEE C Y, LIN K L. The time-of-flight estimation accuracy versus digitization parameters[J]. Journal of the Royal Society Interface,2008,28(5):1392-2114.
[4] 郑丹丹,张朋勇,孙立军,等. 单弯管下游超声流量计的安装和测量性能研究[J]. 仪器仪表学报,2010,31(7):1601-1607.
[5] 何存富,刘飞,张立新,等. 多声道超声流量计在弯管段安装的适应性研究[J]. 仪器仪表学报,2011,32(1):6-12.
[6] CALOGIROU A, BOEKHOVEN J, HENKES R. Effect of wall roughness changes on ultrasonic gas flowmeters[J]. Flow Measurement and Instrumentation,2001,12(3):219-229.
[7] MOORE P I, BROWN G J, STIMPSON B P. Ultrasonic transit-time flowmeters modelled with theoretical velocity profiles:methodology[J]. Measurement Science and Technology,2000,11(12):1802-1811.
[8] DRENTHEN J G, VERMEULEN M, KURTH M, et al. Krohne:Ultrasonic flow meter diagnostics and the impact of fouling[C]//15th International Flow Measurement Conference,2010.
[9] BUTKUS J, BRSŠAUSKAS K. Peculiarities of slow rate gas flow velocity measurement[J]. Ultragarsas,2000,37(4):24-28.
[10] 金志军,谷祖康. 热量表计量检定技术和程序实施指南[M].北京:中国质检出版社,2015:44.
[11] 杨有涛,陈梅. 流量标准装置建标指南[M]. 北京:中国质检出版社,2013:110-117.
[12] 邓国强,董守平. 气液两相水平管流流态可视化分析[J]. 石油机械,1999,12(27):21-24.
[13] 邹蓬,吕传玉,李凤名. 时差法超声波流量计的原理和设计[J]. 建设科技,2012(4):5-10.
[14] 赵雪松. 单声道超声波流量计的研制[D]. 杭州:中国计量学院,2013.
[15] 王文涛. 多声道气体超声流量计流场适应性[D]. 大庆:东北石油大学,2011.