作者：魏彦

作者单位：深圳职业技术学院计算机应用工程系, 广东深圳 518055

关键词：转速检测; 发动机测功系统; M/T法; 高精度测量

摘要：

转速信号是发动机测功系统十分重要的物理量,其检测方法与电路设计直接关系到测功系统的性能和测试控制精度。在详细分析M法、T法和M/T法等测速方法的基础上,本文设计了M/T法测速的硬件电路和自动量程切换的软件实现方法,利用磁电式转速传感器实现了发动机测功系统转速的高精度测量。测速系统实际运行表明,本文设计的非接触式转速测量系统结构简单、抗干扰能力强适用于交、直流全数字化调速系统的数字测速装置的工程设计实践中。

Research on rotate speed of engine power-test system

WEI Yan

Department of Computer Application Engineering, Shenzhen Polytechnic College, Shenzhen 518055, China

Abstract: Rotate speed is one of important signals of the engine power-test system, whose measure method and examining circuit are related to the performance and precision of the power-test system. Base on the analysis of M method, T method and M/T method, as well as their errors in the system, this paper presents the hardware circuit of M/T method and the design of software, which possesses the function of switching measure ranges automatically. And the rotate speed of the power-test system is measured with high precision by magnetoelectric rotate speed sensor, the method, the circuit and algorithm in the paper. The practical results show that the rotate speed measuring system in the paper has the virtues of simple structure, fine disturbance rejection performance, etc., which is also applied to the practice of speed measure of alternative and direct current timing system.

Keywords: Rotate speed measure; Engine power-test system; M/T method; High precision measure

2005, 31(6): 84-86  收稿日期: 2004-9-23;收到修改稿日期: 2004-12-13

基金项目: 

作者简介: 

参考文献

[1] 刘建国.交流电力测功机及其控制系统研究[D].长沙:湖南大学硕士学位论文, 2004.
[2] 王晓光.小功率交流电力测功器系统的研制[J].武汉理工大学学报, 2001, 23(1):79-80.
[3] 齐长远, 王爱明, 等.一种非接触高精度的转速测量方法[J].微型机与应用, 2000, 19(12):21-22.
[4] 伍学奎, 陈进, 周轶尘.内燃机瞬时转速的研究[J]. 内燃机学报, 1999, 17(3):313-315.
[5] 宋喜奎.测量动态转速的一种方法[J].内燃机, 1998, 5:25-28.