作者：陆明刚, 徐斌, 宋启敏, 殷建

作者单位：上海大学机械工程及自动化系, 上海 200072

关键词：光纤预制棒; 控制系统; 熔缩工艺; 单片机; 模糊控制

摘要：

本文以MVCD制造设备控制系统为研究对象,采用单片机为处理芯片的控制系统设计方案。介绍了制造设备控制系统整体设计,具体说明了硬件设计的基本原理和方法,包括微处理器模块、过程通道模块以及人机接口模块设计等。设计了控制系统的应用程序,应用了模糊控制理论对模管进气端和出气端的压力差进行控制,减少了控制系统振荡,获得了较好的效果。

Control system of MCVD process equipment

LU Ming-gang, XU Bin, SONG Qi-min, YIN Jian

Department of Mechatronics and Automation Engineering, Shanghai University, Shanghai 200072, China

Abstract: This paper selected the MCVD process control system as the main research object. According to the process requirements, the authors used micro-controller as a control system design plan and introduced some basic principles of the hardwares designing of the control system, which included microprocessor module, procedure channel module and human-machine interface module designs etc. The authors also introduced control system design of both manufacturing technology and applying program. Finally, the fuzzy control theory was applied to the control system for controlling the gas pressure difference between the inside and outside of the air mold. The good result has been achieved using this design.

Keywords: Optical fiber preform; Control system; Collapsar technic; Single-chip microcontroller; Fuzzy control

2005, 31(6): 13-16,54  收稿日期: 2005-6-13;收到修改稿日期: 2005-8-19

基金项目: 上海教育委员会基金资助(03AK07)

作者简介: 陆明刚(1960-),男,浙江宁波市人,副教授,主要从事传感器检测与控制技术的研究。

参考文献

[1] 唐人杰.光纤预制棒技术的最新发展[J].光通讯技术, 2000, 5:54-58.
[2] 汪红霞.我国光纤预制棒技术又迈新台阶[J].通信世界, 2002, 26:14.
[3] 任学民.世界光纤产业走势[J].光纤与光缆及其应用技术, 2002, 2:42-44.
[4] 匡效才.单片机和液晶显示器接口及驱动技术[J].中国测试技术, 2004, 30(2):61-64.
[5] 李斌.光纤预制棒复合工艺的研究[J].光通信研究, 2003, 46:35-37.
[6] 陶永华.新型PID控制及其应用——第六讲新型PID 控制器及其发展[J]., 工业仪表与自动化装置, 1998, 3:55-59.