作者：李咏红

作者单位：电子科技大学机械电子工程学院, 四川成都 610054

关键词：Pro/E; Pro/Toolkit; 参数化零件; 二次开发

摘要：

本文详细研究了利用Pro/E二次开发工具Pro/Toolkit进行参数化二次开发、原理、方法和实现的关键技术,建立了参数化零件二次开发模型和开发流程,利用VC++,实现了3D零件模型的二次开发

Study and realization of the further development about the parameter part of Pro/E

LI Yong-hong

College of Mechanical Electronic Engineering, University of Electronic Science and Technology, Chengdu 610054, China

Abstract: The detailed study has been made about the principle、the method and the realized techniques of the further development using Pro/Toolkit.A development flow and a further development model of parameter part were created and realized the further development of 3D part model by means of C C++.

Keywords: Pro/E; Pro/Toolkit; Parameter part; Further development

2005, 31(1): 101-103  收稿日期: 2004-3-2;收到修改稿日期: 2004-5-16

基金项目: 

作者简介: 

参考文献

[1] Parametric Technology Corporation, Pro/ENGINEER Wildfire Online Help[R], USA:PTC, 2003.
[2] Parametric Technology Corporation, Pro/ENGINEER Wildfire Pro/TOOLKIT User's Guide[C], USA:PTC, 2003.
[3] 金淘, 陈敏, 童水光. Pro/ENGINEER软件的二次开发技术[J].计算机工程与应用, 2001, 13.
[4] 贺菲, 刘子建.基于Pro/E的CAD系统二次开发技术[J].计算机应用, 2002, 22(11).
[5] 江渡, 单泉, 兰丽华.基于Pro/E二次开发的铁路客车钢结构三维参数化CAD系统[J].机械设计与制造工程, 2002, 31(5).