您好,欢迎来到中国测试科技资讯平台!

首页> 《中国测试》期刊 >本期导读>电磁兼容辐射骚扰样品测试桌的设计与研究

电磁兼容辐射骚扰样品测试桌的设计与研究

2813    2016-04-29

免费

全文售价

作者:叶长青, 赵海波, 王杰

作者单位:惠州出入境检验检疫局, 广东 惠州 516006


关键词:电磁兼容;辐射骚扰;测试桌;介电常数;不确定度


摘要:

为减小木质测试桌对辐射骚扰测试结果的影响,以低介电常数的聚苯乙烯颗粒为材料,设计一款高频低反射样品测试桌,参考标准GB/T 6113.1042008测试桌影响的评估程序,搭建测试系统。使用3 m法电波暗室测试环境,在30 MHz~1 GHz和1~8 GHz两个频段对聚苯乙烯泡沫桌和木桌进行对比测试并进行数据分析,验证聚苯乙烯泡沫桌对辐射骚扰测试结果的影响。研究结果表明:测试时,应使用介电常数低、耐潮湿性、绝缘性优良和稳定性高的样品测试桌,以减小由测试桌引入的标准不确定度。该研究结论对电磁兼容领域的辐射骚扰测试、辐射杂散测试、辐射抗扰度测试具有一定的参考价值和指导意义。


The design and research of test table applied in radiated emission of electromagnetic compatibility

YE Changqing, ZHAO Haibo, WANG Jie

Huizhou Entry-exit Inspection and Quarantine Bureau, Huizhou 516006, China

Abstract: To decrease the influence caused by wooden test tables on the results of radiated emission measurement, a low reflective test table that is especially used in high frequency is made with low dielectric constant polystyrene. A testing system is designed as per the evaluation procedure for test table influences of standard GB/T 6113.104——2008. Comparison testing and research are done under the frequency scope of 30 MHz- 1 GHz and 1- 8 GHz in a 3- meter anechoic chamber. It turns out that the polystyrene test table has smaller influence than the wooden test table in reference to the radiated emission measurement. The experiment shows test tables characterized by low dielectric constant, moisture resistance, good insulation, and high stability should be used to reduce standard uncertainty in radiated emission measurement. The conclusions are instructive and meaningful for measuring radiated emission, spurious emission and radiated susceptibility.

Keywords: electromagnetic compatibility;radiated emission;test table;dielectric constant; uncertainty

2016, 42(4): 89-92  收稿日期: 2015-07-20;收到修改稿日期: 2015-09-09

基金项目: 

作者简介: 叶长青(1978-),男,山东武城县人,高级工程师,硕士,主要从事电子电器产品安全与电磁兼容检测与研究工作。

参考文献

[1] 周晓燕. EMC及用于EMC测试的电波暗室[J]. 环境技术,1998(3):35-36.
[2] 武彤,沈庆飞. 实验室之间辐射骚扰场强比对的设计[J].电子质量,2007(8):82-84.
[3] 何飞,孙小妹. 不同HDMI电缆线对辐射骚扰场强测试的影响[J]. 电子质量,2013(12):65-70.
[4] 周毅,张少杰,谢晋雄,等. 布线方式对信息技术设备辐射骚扰场强测试的影响[J]. 辽宁工程技术大学学报(自然科学版),2014,33(2):255-260.
[5] 杨立委,陈继宣,庞达. 电源引线对信息技术设备辐射骚扰特特性的影响[J]. 科技传播,2011(11):70-71.
[6] 信息技术设备的无线电骚扰限值和测量方法:GB 9254—2008[S]. 北京:中国标准出版社,2008.
[7] 无线电骚扰和抗扰度测量设备和测量方法规范 第1-4部分:无线电骚扰和抗扰度测量设备 辅助设备 辐射骚扰:GB/T 6113.104—2008[S]. 北京:中国标准出版社,2008.
[8] 吴晔. 木材介电常数的研究[J]. 安徽农学院学报,1989(1):59-74.
[9] 郭明洋. 浅谈家电中聚苯乙烯的应用前景[J]. 化学工程与装备,2010(10):131-132.
[10] 电磁干扰测量中不确定度的评定指南:CNAS-GL07[S].北京:中国合格评定国家认可委员会,2006.
[11] 李建明,王巍,肖鹏,等. 半电波暗室中的EMI辐射骚扰试验测量不确定度分析与评定[J]. 中国测试,2012,38(6):17-19.