作者：张俊鑫¹, 范伟军¹, 王学影¹, 郭斌²

作者单位：1. 中国计量大学计量测试工程学院, 浙江 杭州 310018;
2. 杭州沃镭智能科技股份有限公司, 浙江 杭州 310018

关键词：压力机;双通道;气液增压;装配

摘要：

针对汽车零部件自动化装配生产线中压装工位压力机输出压力控制精度与工作效率矛盾的问题,综合气动压力机与液压机优点,设计基于气液增压技术的双通道气液压力机。压力机动力源采用气液增压缸,气压驱动采用大通径、小通径组合供气控制方式,实现快节拍、高准确度的控制需求。结合气液增压缸工作原理设计双通道气液压力机的增压控制过程;基于PCI数据采集控制卡,设计计算机数据采集控制系统,开发LabVIEW压力机的数据采集与控制软件。搭建压力机的验证平台,实验结果表明:双通道气液压力机的输出压力最大偏差100 N,增压过程时间2 s,符合汽车零部件在线压力机的设计要求。

Design and development of dual-channel gas-liquid press

ZHANG Junxin¹, FAN Weijun¹, WANG Xueying¹, GUO Bin²

1. Institute of Precision Measurement and Control, China Jiliang University, Hangzhou 310018, China;
2. Hangzhou Wolei Intelligent Technology Co., Ltd., Hangzhou 310018, China

Abstract: To make balance between control precision and control efficiency of output pressure of presses on the automatic assembling line for automobile component, a dual-channel gas-liquid press is designed with the gas-liquid supercharging technology as well as the comprehensive advantages of pneumatic presses and hydraulic machines. A gas-liquid pressurized cylinder is equipped its power source and gas drive is a combination of bigger and smaller aperture gas for fast and precise control. The pressurized control flow of the press is devised according to the working principle of the gas-liquid pressurized cylinder. Based on PCI data acquisition and control cards, a computer data acquisition and control system is developed; data acquisition and control software is designed with the LabVIEW platform; and a verification platform is set up. The experimental results indicate that the maximum deviation of output pressure is less than 100 N and the time of pressurization process is within 2 s, conforming to the design requirements of the press, and thus the method is suitable for automatically crimping auto parts.

Keywords: press;dual-channel;gas-liquid pressurized;assembly

2016, 42(4): 75-80  收稿日期: 2015-09-21;收到修改稿日期: 2015-10-27

基金项目: 国家自然科学基金项目(51405463);浙江省仪器科学与技术重中之重学科科研创新活动计划项目(JL150507);浙江省公益技术应用研究计划项目(2015C31081)

作者简介: 张俊鑫(1990-),男,河南新乡市人,硕士研究生,专业方向为精密仪器与机械。

参考文献

[1] 张金枝. 自动化装配设备的广泛应用[J]. 制造业自动化,2006,28(12):252-253.
[2] 郭楠. 气液增压系统的动态性能分析与优化研究[D]. 北京:北京印刷学院,2013.
[3] 张保松,曾韬,张合明,等. 气液增压器在机床夹具中的应用[J]. 液压与气动,2006(12):61-62.
[4] 于鸿飞,徐双用,张远深,等. 基于AMESim的气液增压缸的动态性能分析[J]. 液压与气动,2015(4):64-67.
[5] KWUIMY C,KITIO A, RAMAKRISHNAN S, et al. On the nonlinear on-off dynamics of a butterfly valve actuated by an induced electromotive force[J]. Journal of Soundand Vibration,2013(332):24-27.
[6] TOOMEY, CHRISTOPHER G. Pneumatic conveying system optimization[C]. IEEE Cement Industry Technical Conference,2013.
[7] PRECUP R E, HELLENDOOM H. A survey on industrial applications of fuzzy control[J]. Computers in Industry,2011,62(3):213-226.
[8] ZENTNER, STEPHAN, ERIKA, et al. A cascaded control structure for air-path control of diesel engines[J]. Proceedings of the Institution of Mechanical Engineers Part D Journal of Automobile Engineering,2014,228(7):799-817.
[9] TSAI J, KOCH C R, SAIF M. Cycle adaptive feedforward approach controllers for an electromagnetic valve Actuator[J]. Control Systems Technology IEEE Transactions,2012,20(3):738-746.
[10] 牟晓勇. 基于气液增压的内高压成形设备控制系统的分析与设计[D]. 哈尔滨:哈尔滨工业大学,2010.
[11] 李雪梅,丁峰. 节能式气液增压缸的设计与应用[J]. 液压与气动,2006(9):40-41.
[12] 张丙才,刘琳,高广峰,等. 基于LabVIEW的数据采集与信号处理[J]. 仪表技术与传感器,2007(12):74-75.
[13] 杜鹃,邱晓晖,赵阳,等. 基于LabVIEW的数据采集与信号处理系统的设计[J]. 南京师范大学学报,2010,10(3):7-10.
[14] 测量不确定度评定与表示:JJF 1059——2012[S]. 北京:中国计量出版社,2012.
[15] 冯雪. 数据采集卡性能指标与应用[J]. 工业控制计算机,2008,21(5):10-11.