您好,欢迎来到中国测试科技资讯平台!

首页> 《中国测试》期刊 >本期导读>基于DDS和FPGA的数字式多脉冲激励超声检测系统设计

基于DDS和FPGA的数字式多脉冲激励超声检测系统设计

2889    2016-06-29

免费

全文售价

作者:张宇, 王雪梅, 倪文波

作者单位:西南交通大学机械工程学院, 四川 成都 610031


关键词:直接数字合成;现场可编程门阵列;超声波检测;高速数据采集;多脉冲激励


摘要:

针对现有超声波检测系统发射脉冲单一、设计复杂等不足,设计一个以现场可编程门阵列(FPGA)为核心的数字式超声检测系统。采用直接数字合成(DDS)技术,通过可编程方式控制超声波激励信号的产生。检测系统能够针对不同检测需要,灵活设置和选择不同波形、频率、脉冲宽度和脉冲数的激励信号,从而提高检测能力和适应性。试验结果表明:多脉冲激励方式能够在较低的激励电压下,获得更强的超声回波信号,实现工件内部更深范围内缺陷的有效检出。


Design of digital multi-pulse excitation ultrasonic testing system based on DDS and FPGA

ZHANG Yu, WANG Xuemei, NI Wenbo

School of Mechanical Engineering, Southwest Jiaotong University, Chengdu 610031, China

Abstract: A digital ultrasound detection system based on field programmable gate array (FPGA) was designed in view of the deficiency of the current ultrasonic testing system such as single transmission pulse and complicated design. The system adopts direct digital synthesis (DDS) technology and programmable controlling method to control the generation of ultrasonic excitation signals. The excitation signals of different waveforms, frequencies, pulse widths and pulse numbers can be flexibly set and selected for different testing demands, thus improving the capability and adaptability of detection. The experiment results show that much stronger ultrasonic echo signals can be obtained at a lower excitation voltage and the defects within a deeper range of the workpiece interior can be detected through this multi-pulse excitation method.

Keywords: DDS;FPGA;ultrasonic testing;high speed data acquisition;multi-pulse excitation

2016, 42(6): 74-79  收稿日期: 2015-08-22;收到修改稿日期: 2015-10-08

基金项目: 

作者简介: 张宇(1989-),女,吉林松原市人,硕士研究生,专业方向为无损检测。

参考文献

[1] 王雪梅. 无损检测技术[M]. 成都:西南交通大学出版社,2010:19-31.
[2] 郑超. 基于FPGA和DSP的超声波检测系统设计[J]. 中国测试,2010,36(6):53-56.
[3] 李建. 便携式数字化超声波检测仪器的研究[D]. 西安:西安科技大学,2005.
[4] 孙昊. 基于FPGA和DDS的信号源设计[D]. 成都:电子科技大学,2009.
[5] 朱晓恒,高晓蓉. 超声探伤技术在无损检测中的应用[J]. 现代电子技术,2010(21):112-116.
[6] 李克明. 超声波探伤[M]. 北京:水利电力出版社,1985:75-81.
[7] 胡建恺,张谦琳. 超声检测原理和方法[M]. 合肥:中国科学技术大学出版社,1993:53-70.
[8] 李晓伟. 基于FPGA的便携式超声无损检测仪研制[D].北京:北京工业大学,2012.
[9] 蒋危平. 数字化超声波探伤仪十五年技术进展[J]. 无损检测,2004,26(3):145-147.
[10] 张颜艳,吴伟. 基于FPGA的超声信号采集系统[J]. 无损探伤,2010,34(4):18-19.