您好,欢迎来到中国测试科技资讯平台!

首页> 《中国测试》期刊 >本期导读>圆容栅传感器设计及可靠性验证

圆容栅传感器设计及可靠性验证

2727    2016-08-19

免费

全文售价

作者:任宇佳1,2, 尤文斌1,2, 马铁华1,2

作者单位:1. 中北大学电子测试技术国家重点实验室, 山西 太原 030051;
2. 中北大学仪器科学与动态测试教育部重点实验室, 山西 太原 030051


关键词:扭矩测试;圆容栅传感器;电磁特性仿真;可靠性


摘要:

为改善旋转轴动态扭矩测试中信号传输受限、供电复杂的现状,提高传感器灵敏度、响应速度以及抗干扰能力,设计一种基于电容充放电特性的非接触、无源圆容栅扭矩传感器,并对其电磁特性进行仿真,分析传感器的栅极数量及整体屏蔽对传感器输出的影响。通过试验验证可知传感器的可靠性高,达到预期要求。


Design and reliability verification of round capacitive sensor

REN Yujia1,2, YOU Wenbin1,2, MA Tiehua1,2

1. National Key Laboratory for Electronic Measurement Technology, North University of China, Taiyuan 030051, China;
2. Key Laboratory of Instrumentation Science and Dynamic Measurement Ministry of Education, North University of China, Taiyuan 030051, China

Abstract: In order to improve the current situation of signal transmission limitation and complicated power supply during dynamic torque test of rotating shaft and the sensitivity, response speed and the ability to resist interference of the sensor, a kind of non-contact and passive round capacitive torque sensor based on the characteristic of capacitance charge-discharge is designed, and its electromagnetic property is simulated to analyze the influence of the number of sensor grids and the whole shield on the sensor output. Experimental results show that the reliability of the sensor is high, and the sensor is expected to meet the requirements.

Keywords: torque measurement;round capacitive sensor;electromagnetic characteristic simulation;reliability

2016, 42(7): 79-83  收稿日期: 2015-10-17;收到修改稿日期: 2015-12-6

基金项目: 

作者简介: 任宇佳(1991-),男,山西吕梁市人,硕士研究生,专业方向为动态测试与智能仪器。

参考文献

[1] 闫晓强,张海,杨舒拉,等. 轧机扭矩遥测系统[J]. 冶金设备,2001,130(6):63-65.
[2] SACKFIELD A, BARBERJ R, HILLS D A. A shrink-fit shaft subject to torsion[J]. European Journal of Mechanics A/Soilds,2002,21(10):73-84.
[3] 张建伟,杨卓静,马铁华,等. 容栅传感技术在动态扭矩测试中的应用[J]. 技术与应用,2012:17-19.
[4] LIN F J, WAI R J, LIN P C. Robust speed sensorless induction motor drive[J]. IEEE Trans Aerosp Electron Syst,1999,35(3):566-578.
[5] 王丹,林中. 高准确度小扭矩标准机的研究与实现[D]. 北京:北京邮电大学,2007.
[6] 喻洪麟,刘旭飞,吴永烽. 光栅扭矩传感器的信号电路设计[J]. 光电工程,2005,32(8):93-96.
[7] 樊星,赵美蓉. 基于光纤光栅的扭矩传感系统的研究[D].天津:天津大学,2013.
[8] 王华强,颜文俊. 一种用于EPS系统的电感式扭矩传感器实施方案[C]//第二十九届中国控制会议论文集.北京:TCCT,2010.
[9] 刘双红,靳鸿,陈昌鑫,等. 基于锁相环和PWM技术的容栅传感器微小扭矩信号测试方法[J]. 电子器件,2014,37(1):59-62.
[10] 赵博,张洪亮. Ansoft12在工程电磁场中的应用[M]. 北京:中国水利水电出社,2010:87-260.
[11] 丁志强,陈仁文,章飘艳,等. 单方向电磁式振动能量采集结构的设计与优化[J]. 国外电子测量技术,2014(12):43-48.
[12] 张宇鹏,徐钰蕾,王昱棠. 高精度电容式角位移传感器测量方法[J]. 仪器仪表学报,2014,35(S1):147-150.
[13] 刘双红,靳鸿,张海龙,等. 离式差分结构容栅传感器转速扭矩测试系统[J]. 探测与控制学报,2013,35(5):49-52.
[14] 谢锐,马铁华,武耀艳,等. 嵌入式容栅传感技术及轴功率测试研究[J]. 仪器仪表学报,2012,33(4):844-849.