作者：黄稣, 潘嘉声, 张勇

作者单位：1. 广东省现代几何与力学计量技术重点实验室, 广东 广州 510405;
2. 广东省计量科学研究院, 广东 广州 510405

关键词：大长度;折光腔;虚拟基线;费马原理

摘要：

大长度测量仪检定工作一般在野外基线场上进行,耗时费力、强度高效率低、受环境影响严重等问题一直困扰计量检定人员。为改变这一落后作业模式,在手持激光测距仪室内检定装置研制成功的基础上,该文提出基于折光腔法与虚拟基线理论构造鉴相式大长度测量仪检定装置,拟将野外检定基线场完整搬入室内。利用费马原理设计的折光腔将长度 1 000 m的光路压缩在数十米以内,利用光的反射定律推导出虚拟基线(室内大长度各段标准值)的计算方法,同时进一步提出检定装置的结构设计,技术参数及控制措施,并通过对系统潜在影响因素分析以论证该大长度室内检定装置的可行性。

Verification method of phase detector large length measuring instrument based on refraction cavity

HUANG Su, PAN Jiasheng, ZHANG Yong

1. Guangdong Provincial Key Laboratory of Modern Geometric and Mechanical Metrology Technology, Guangzhou 510405, China;
2. Guangdong Institute of Metrology, Guangzhou 510405, China

Abstract: Generally, the calibration work is carried out in outdoor fields through large length meters, but it is time-consuming, inefficient and severely affected by the surroundings, which have been long plaguing the metrological verification personnel. Based on the indoor test device for portable laser rangefinder, this paper has proposed to design a calibration device for phase-demodulation large-length measuring instrument according to refraction cavity and virtual baseline theory, that is, to move verification baseline fields from outdoor to indoor. The refraction cavity designed by Fermat's principle is used to fold the light path greater than 1 000 m within 10 m and at the same the reflection law of light is applied to deduce a calculation formula to calculate the virtual baseline (standard value at each section of indoor large length). The structure design, technical parameters and control measures of the calibrating device has been discussed as well, and its feasibility has been demonstrated by analyzing the potential influence factors of the system.

Keywords: long length;refraction cavity;virtual baseline;Fermat's principle

2015, 41(12): 21-24  收稿日期: 2015-06-21;收到修改稿日期: 2015-07-30

基金项目: 国家质检总局科技计划项目(2011QK306)

作者简介: 黄稣(1957-),男,重庆市人,教授级高工,主要从事测绘仪器的计量检定和科研工作。

参考文献

[1] ISO17123-4—2012 Part 4: Electro-optical distance meters (EDM measurements to reflectors)[S].2002.
[2] 石磊. 全站仪检定中必须注意的几个问题[J]. 中国计量,2005(6):65.
[3] 杨维芳,傅辉清. 光电测距仪检定方法研究进展[J]. 光学仪器,2008(30):77-81.
[4] 杨维芳. 光电测距仪室内长基线建立方法研究[D]. 武汉:中国地震局地球物理研究所,2009.
[5] 杨潘,李新碗,李中方. 基于标准光纤的全站仪测距室内检定[J]. 电子技术,2011(2):4-5.
[6] 史洁琴,何珂,徐永. 光纤基线标定激光测距仪方法研究[J]. 南京航天航空大学学报,2012(6):830-834.
[7] 黄稣. 建立室内虚拟长度基线场的可行性探讨[J]. 计测技术,2006(4):22-25.
[8] 潘嘉声,黄稣,张勇. 室内虚拟直线基线的研究[J]. 计量学报,2015,36(1):19-21.
[9] 许春玉,谢德林,杨虎. 激光大气传输透过率的分析[J]. 光电工程,1999,12(29):8-11.
[10] 孔明东,李瑞洁,周九林,等. 高反射率光学薄膜的一种新设计方法[J]. 光电子·激光,2000(11):62-64.
[11] JJG 100——2003全站型电子速测仪检定规程[S]. 北京: 中国计量出版社,2003.
[12] 黄稣,潘嘉声,张勇. 手持式激光测距仪室内检定装置的最佳方法及可行性探讨[C]//测绘仪器装备研究与创新,北京:测绘出版社.