您好,欢迎来到中国测试科技资讯平台!

首页> 《中国测试》期刊 >本期导读>基于混响时间的汽车内饰设计方法研究

基于混响时间的汽车内饰设计方法研究

3054    2016-01-15

免费

全文售价

作者:王志坚, 范朝纲

作者单位:沈阳航空航天大学机电工程学院, 辽宁 沈阳 110136


关键词:声学; 内饰设计; 声学仿真; 混响时间


摘要:

针对汽车内饰环境,提出利用声学模拟软件EASE进行车载扬声器声场混响时间仿真的方法,指导车辆内饰设计,提高工作效率。为验证EASE软件仿真的准确性,分别通过EASE软件和电声测试系统CLIO进行某型国产轿车车载扬声器声场混响时间研究。结果显示:混响时间测量曲线与EASE仿真曲线吻合良好,EASE软件的仿真结果准确可靠。


Study on design method for vehicle interior trim based on reverberation time

WANG Zhi-jian, FAN Chao-gang

College of Mechanical Engineering, Shenyang University of Aeronautics and Astronautics, Shenyang 110136, China

Abstract: A method was proposed to guide the design of interior trim and improve the work efficiency in the interior trim environment, in which the reverberation time in vehicular speaker sound field was simulated by acoustic simulation software EASE. Through the software EASE and the electro-acoustic test system CLIO, the research of reverberation time was conducted separately in the domestic car of a certain type to verify the accuracy of simulation. The results demonstrated that curves obtained by two methods mentioned above were in good agreement, and the simulation result was accurate and reliable.

Keywords: acoustics; design of interior trim; simulation of sound field; reverberation time

2013, 39(1): 117-120  收稿日期: 2012-7-24;收到修改稿日期: 2012-9-12

基金项目: 

作者简介: 王志坚(1974-),女,河南安阳市人,副教授,博士,主要从事车载扬声器声场仿真研究。

参考文献

[1] 刘海霞. 多功能视听室音质控制实验研究[D]. 青岛:中国海洋大学,2008.
[2] 李敏毅,孙海涛,吴杰歆,等. 混响时间及测量方法简介[J].中国测试技术,2005,31(1):18-20.
[3] 威廉J·卡瓦诺夫,约瑟夫A·威尔克斯. 建筑声学-原理和实践[M]. 赵樱译. 北京:机械工业出版社,2005:37-41.
[4] 高玉龙. 厅堂建筑音质计算机辅助设计[M]. 北京:国防工业出版社,2007:17-18.
[5] ISO 3382-1997 Acoustics-measurements of reverberation time of rooms with reference to other acoustical parameters[S]. International Organization for Standardization,1997.
[6] 宁方立. 小尺度封闭空间可听化研究[D]. 西安:西北工业大学,2004.
[7] 朱晓娜. 纺织品吸声隔音材料研究进展[J]. 现代丝绸科学与技术,2010(10):46-48.
[8] 赵淼淼. 汽车内饰材料吸音隔音性能的研究[D]. 合肥:安徽农业大学,2010.
[9] 谭柳娜. 长安福特B型车内饰件声学性能研究[D]. 南京:南京理工大学,2010.