作者：徐海卫, 李刚, 彭建华, 曹江萍, 蒋毅

作者单位：中国测试技术研究院, 四川 成都 610021

关键词：回转揉捻机构; 揉捻力度检测与控制; 机构改造; 测力传感器; 弹簧平衡机构

摘要：

茶叶、中药材、饲料等物料在回转揉捻加工过程中的揉捻力度是影响物料加工品质的重要因素,目前揉捻力度的大小和控制只能凭借经验来粗略估算,无法准确检测,影响物料加工质量,无法保证物料加工品质的一致性.通过对回转揉捻机构的改造,设置测力传感器和弹簧平衡机构,并辅以控制系统,实现了回转揉捻机构的力度准确检测和有效控制,提高了物料的揉捻加工质量,保证了揉捻品质的一致性,并且满足了回转揉捻机构参数化、自动化应用需求.

Research on measurement and controlling of rolling equipment intensity

XU Hai-wei, LI Gang, PENG Jian-hua, CAO Jiang-ping, JIANG Yi

National Institute of Measurement and Testing Technology, Chengdu 610021, China

Abstract: The rolling intensity is an important factor for the processing quality of materials-rolling，such as tea-rolling, herb-rolling and fodder-rolling, etc. At present, people roughly estimate the force of the rolling intensity only by their experience, which is not accurate enough for controlling the quality of materials-rolling, e.g., the quality of materials is not at the same level for each machining time. By transforming the intensity mechanism of the rolling equipment, applying intensity sensor and the setting of spring balance mechanism, with the controlling system, a controlling mechanism was designed to control the intensity of materials-rolling accurately. This mechanism can increase the quality of rolling, guarantee the consistency of rolling quality, and satisfy the demands of parameterization and automation for rolling equipments.

Keywords: rolling mechanism; rolling pressure measurement and controlling; transforming of mechanism; intensity sensor; spring balance mechanism

2011, 37(5): 68-70  收稿日期: 2010-10-9;收到修改稿日期: 2010-12-17

基金项目: 

作者简介: 徐海卫(1960-), 男, 四川南充市人, 高级工程师, 主要从事三坐标测量机和专用机械研发工作.

参考文献

[1] 谭和平, 邹燕, 叶善蓉, 等. 茶叶中的多酚类物质及其分析方法综述[J]. 中国测试技术, 2008(4): 4-11.
[2] 周仁贵, 孙承业. 茶叶揉捻自动化的关键技术[J]. 中国茶叶, 2008(3): 13-15.
[3] 林宏清. 绿茶揉捻机主要性能结构设备参数的初步分析[J]. 茶叶科学, 1965(3): 66-72.
[4] 杨杰斌. 电阻应变式称重传感器产品质量及发展动态[J].衡器, 2005(6): 8-11.
[5] 王昊, 吕立新. 称重传感器的选用[J]. 企业标准化, 2007(9): 38.
[6] 任志斌. 电阻式应变称重传感器选用与使用原则浅谈[J].衡器, 2005(S1): 32-33.
[7] 李国斌. 机械设计基础[M]. 北京: 机械工业出版社, 2010.
[8] 王文斌. 机械设计手册[M]. 北京: 机械工业出版社, 2004.
[9] 郑文纬, 吴可坚. 机械原理[M]. 北京: 高等教育出版社, 2008.