作者：孟国军, 倪仁品, 陈建平

作者单位：中国电子科技集团公司第38研究所, 安徽 合肥 230031

关键词：雷达; 前翻四连杆折叠机构; 双驱同步技术; 平面阵列天线; 机动性

摘要：

为实现大尺寸平面阵列天线雷达的海陆空多种运输方式兼容,特别是铁路运输时直接驶上平板车,采用了一种新型的前翻四连杆折叠机构。着重介绍了该机构中以液压油缸作为驱动源的四连杆折叠机构的工作原理和结构设计,分析了折叠机构运动规律和受力情况,并在折叠机构系统设计中采用驱动源同步来实现两套折叠机构在展开与折叠过程中实时同步。该机构成功用于某高机动雷达的大型平面阵列天线折叠,通过长期使用证明机构性能良好、可靠性高。

Research and implementation of new folding mechanism for radar antenna

MENG Guo-jun, NI Ren-pin, CHEN Jian-ping

No.38 Research Institute of China Electronics Technology Group Corporation, Hefei 230031, China

Abstract: The authors use a new type of four-link forward-folding mechanism to achieve large planar array antenna radar which is compatible with sea-land-air transportation modes, especially, the mode that the radar equipment can be driven directly onto railroad flat in rail transport. The design was introduced for the folding mechanisms which used the hydraulic cylinder as the driving source, its working principle and structure design were emphasized, and the law of its motion and force conditions was analyzed. In the system design of the folding mechanisms, the synchronous driving source was used to achieve real-time synchronization of the two folding mechanisms in the process of expanding and collapsing. The folding mechanism has been successfully used in highly mobile radar for expanding and folding of large planar array antenna. Long-term application shows the folding mechanism has good performance and high reliability.

Keywords: radar; four-link forward-folding mechanism; dual drive synchronization; planar array antenna; flexibility

2012, 38(1): 85-89  收稿日期: 2011-2-14;收到修改稿日期: 2011-4-26

基金项目: 

作者简介: 孟国军(1972-),男,四川安岳县人,工程师,硕士,主要从事雷达结构总体研究。

参考文献

[1] 陈建平. 大阵面天线自动展开／折叠设计与系统实现[J]. 现代电子,2002,79(2):46-50.
[2] 程辉明,许统融. 地面高机动雷达集成化设计技术[J]. 电子机械工程,2005,21(3):22-23.
[3] 孟宪源. 现代机构手册[M]. 北京:机械工业出版社,2006.
[4] 陈立群. 理论力学[M]. 北京:清华大学出版社,2006.
[5] 黄锡恺,郑文纬. 机械原理[M]. 北京:高等教育出版社, 1981.
[6] 张利平. 液压控制系统及设计[M]. 北京:化学工业出版社,2006.
[7] 苏东海. 液压同步控制系统及其应用[J]. 沈阳工业大学学报,2005,27(4):364-367.
[8] 胡佑德. 伺服系统原理与设计[M]. 北京:北京理工大学出版社,1995.
[9] 宋德玉. 可编程序控制器原理及应用系统设计技术[M]. 北京:冶金工业出版社,2006.
[10] 戚仁欣. 雷达天线结构设计的安全设计和安全操作[J]. 现代电子,2004,81(4):48-51.