作者：林兴泰, 张涛, 黄伟, 赵成仁

作者单位：四川大学激光应用技术研究所, 四川 成都 610065

关键词：星模拟器; 光源; 全色彩RGB灯; 电控系统; 恒流源

摘要：

针对多星模拟器向小型化、高精度、大视场、高稳定性的发展需求,提出一种采用全色彩LED作为发光器件的多星模拟器电控光源系统。该系统采用了多达20路的全色彩RGB灯,通过控制各灯的R、G、B三基色驱动电流改变各灯的三基色输出光强,并将各色分为4个亮度档位,使每个灯最多可形成63种亮度组合,从而实现对各路全色彩RGB灯光源的光谱和亮度进行控制,其主要组成部分包括上位计算机、RS485通信总线和电控模块等。实验结果表明:光源输出光功率短期(3 d)稳定性优于1/1 000,工作稳定可靠,满足工程需求。

Circuit controlled light source system of RGB LED for multi-star simulator

LIN Xing-tai, ZHANG Tao, HUANG Wei, ZHAO Cheng-ren

Institute of Applied Laser, Sichuan University, Chengdu 610065, China

Abstract: In order to meet the requirements for developing multi-star simulator in miniaturization, high-precision, large field of view, and high reliability, a circuit controlled light source system based on full color RGB lamp was proposed. It can control the spectrum and brightness of as many as 20 pieces of full color RGB lamp by changing the constant current source of each lamp and adjusting the brightness of each base color. Each color is divided into 4 gears and as a result, each lamp could form 63 kinds of brightness combination. Main compositions of the system are upper computer, RS485 communication bus and circuit control modules. Testing results show that its short-term(3 days) stability of output optical power is better than 1/1 000. It works stably, and fully meets the engineering requirements.

Keywords: star simulator; light source; full color RGB lamp; circuit controlled system; constant current source

2012, 38(2): 103-105  收稿日期: 2011-10-15;收到修改稿日期: 2011-12-30

基金项目: 

作者简介: 林兴泰(1987-),男,湖北黄冈市人,硕士研究生,专业方向为光电精微测试技术。

参考文献

[1] 刘磊,张路,郑辛,等.星敏感器技术研究现状及发展趋势[J]. 红外与激光工程,2007,36(增刊):529-533.
[2] 陈塬,张文明. 面向星模拟器的可调标准色温光源[J]. 光电工程,2010,37(8):24-28.
[3] 孙高飞,张国玉,郑茹,等. 新敏感器标定方法的研究现状与发展趋势[J]. 长春理工大学学报,2010,33(4):8-14.
[4] 刘军. 例说STM32[M]. 北京:北京航空航天大学出版社,2011:2-7.
[5] 陶桓齐,张小华. 模拟电子技术[M]. 武汉:华中科技大学出版社,2007:139-156.
[6] 江义华. Delphi7完美经典[M]. 北京:中国铁道出版社,2003:2-4.