作者：罗天保, 沈景鹏, 黄健, 王作全

作者单位：中国空气动力研究与发展中心校准测试实验室, 四川 绵阳 621000

关键词：计量学; 风洞天平; 校准装置; 考核评定; 技术特性

摘要：

为提高风洞天平校准技术水平和确保校准质量,分析了风洞天平校准设备的计量现状,论证了通过计量测试途径定量考核评定风洞天平校准装置性能水平的必要性;通过分析风洞天平校准装置功能,提出了附加干扰、重复性、稳定性、校准载荷范围和公式系数组成项考核风洞天平校准装置技术水平和校准能力的5个技术特性以及直接考核和间接评定2条评定方法研究思路,供风洞天平和计量科研工作者参考。

Study on technical characteristic and evaluation method for calibration device of wind tunnel balance

LUO Tian-bao, SHEN Jing-peng, HUANG Jian, WANG Zuo-quan

Calibration and Testing Laboratory of CARDC, Mianyang 621000, China

Abstract: In order to improve technical level and quality of wind tunnel balance calibration, the paper analyzed metering situation of calibration device of wind tunnel balance, and demonstrated necessity for quantitatively checking and evaluating the performance of calibration device through metrology and test. By means of functional analysis, five technical characteristics, i.e., additional interference, repeatability, stability, calibration load range, and coefficient composing of formulas, and two evaluation methods, i.e., direct check and indirect evaluation, for evaluating technical characteristic and calibration capability were presented for technologist who studies wind tunnel balance and metrology.

Keywords: metrology; wind tunnel balance; calibration device; check and evaluate; technical characteristic

2012, 38(2): 46-48,102  收稿日期: 2011-4-11;收到修改稿日期: 2011-6-23

基金项目: 

作者简介: 罗天保(1981-),男,四川绵阳市人,工程师,主要从事测试计量技术与仪器研究工作。

参考文献

[1] 贺德馨. 风洞天平[M]. 北京:国防工业出版社,2001.
[2] 何瑾. 高准确度风洞天平静态校验台[J]. 计量学报,2003, 24(4):307-309.
[3] 王金印. 应变天平地轴校、体轴校对比的一些问题[J]. 流体力学实验与测量,2005,19(2):103-109.
[4] GJB 2244-1994风洞应变天平规范[S]. 北京:军标出版社,1994.
[5] GJB 4232-2001激波风洞压电天平设计准则[S]. 北京:军标出版社,2001.
[6] 鲁绍曾. 现代计量学概论[M]. 北京:中国计量出版社,1988.
[7] JJF 1094-2002测量仪器特性评定[S]. 北京:中国计量出版社,2003.
[8] 国家质量监督检验检疫总局计量司组编. 测量仪器特性评定指南[M]. 北京:中国计量出版社,2003.