作者：周杰, 周绍磊, 彭贤, 雷鸣

作者单位：海军航空工程学院控制工程系, 山东 烟台 264001

关键词：电路板; 边界扫描; 板级测试; 可测性设计; JTAG

摘要：

硬件系统的规模越来越大,复杂程度越来越高,对其进行测试也越来越困难,边界扫描技术很好地解决了传统测试的不足。阐述了JTAG技术的基本原理,从设计方法、优化策略及实现技术等方面,对基于JTAG的PCB可测性设计进行了研究,给出了具体的实现方法,并实现了自动测试系统中数据采集电路板的可测性设计。结果证明该方法有效缩短了测试时间,降低了维修测试费用,具有较大的实用价值。

Application of boundary scan technique in design of board-level test

ZHOU Jie, ZHOU Shao-lei, PENG Xian, LEI Ming

Department of Control Engineering, Naval Aeronautical Engineering Academy, Yantai 264001, China

Abstract: As the scale and complexity of hardware systems increase quickly,test becomes a difficult task.The BST technique can well make up the shortcoming of traditional test techniques.This article presented the basic principle of JTAG technique.The design for test of PCB based on JTAG was researched from designed method,optimization strategy,realization technique and so on.Some concrete implementing methods were given and the realization of the measurability design of the data collection circuit board of an automatic test system was also presented.The result shews that,by using this method,th time of test can be effectively shortened and the cost of maintenance and test can be reduced.

Keywords: PCB; Boundary scan; Board level test; Design for test; JTAG

2007, 33(4): 77-80  收稿日期: 2006-8-14;收到修改稿日期: 2006-10-29

基金项目: 

作者简介: 周杰(1979-),男,硕士研究生,主要研究方向为飞行器自动测试技术。

参考文献

[1] 温熙森, 刘冠军, 黎琼炜, 等.基于边界扫描的板级BIT技术研究现状及发展趋势[J].航空计测技术, 1999, 19(3):38-41.
[2] 温熙森, 徐永成, 易晓山, 等.智能机内测试理论与应用[M].北京:国防工业出版社, 2002:92-97.
[3] 张国栋, 朱平云, 曲晖, 等.基于JTAG的板级可测试性设计[J].海军航空工程学院学报, 2005, 20(1):173-176.
[4] 李桂祥, 杨江平, 王隆刚.基于边界扫描技术的板级BIT设计及测试策略[J].现代雷达, 2003, 25(6):1-4.
[5] 王建业, 阚保强, 吴法文.边界扫描技术在PCB可测性设计中的应用[J].空军工程大学学报(自然科学版), 2003, 4(5):60-63.