您好,欢迎来到中国测试科技资讯平台!

首页> 《中国测试》期刊 >本期导读>井斜实时测量方法研究

井斜实时测量方法研究

2043    2016-01-23

免费

全文售价

作者:刘白雁, 王新宇, 杜勇刚, 郑登科

作者单位:武汉科技大学机械自动化学院, 湖北 武汉 430081


关键词:自动垂直钻井; 井斜; 实时测量; 低通滤波器; 重力加速度传感器


摘要:

介绍了用重力加速度传感器进行井斜实时测量的方法,阐述了重力加速度传感器的工作原理及其测量井斜的算法,从理论角度分析了实钻中严重干扰井斜信号的因素噪声、钻具的振动和随机转动,其中噪声和振动信号可采用低通滤波器滤除,而转动使加速度计因离心力产生的测量信号失真,则可通过诸如转速补偿之类的修正去除。经专门的实验装置验证此井斜测量方法和信号处理方法可进行较高精度的井斜实时测量,为高精度的井斜控制奠定了基础。


Study on real-time well inclination measurement

LIU Bai-yan, WANG Xin-yu, DU Yong-gang, ZHENG Deng-ke

College of Machinery and Automation, Wuhan University of Science and Technology, Wuhan 430081, China

Abstract: This article introduced the approach to measure the inclination with accelerometer sensors dynamically during drilling including the operation principle of accelerometer sensors and the arithmetic to measure the inclination.The factors to distort the inclination measurement data seriously were analyzed theoretically,such as noises,the vibration and random rotation of drilling tools.Generally speaking,the noises and vibrations can be eliminated from the inclination measures by using low-pass filter,but the centrifugal force caused by drilling tool rotation,which will distort the accelerometer outputs,can be revised owing to the rotation speed compensation.The approach to measure the inclination and process corresponding information introduced in the paper are verified to be of high precision by professional experiment facilities and lay a foundation for controlling inclination during drilling with high precision.

Keywords: Automatic vertical drilling; Well inclination; Real-time measurements; Low-pass filter; Gravity accelerometer

2007, 33(4): 5-8,25  收稿日期: 2007-1-21;收到修改稿日期: 2007-3-11

基金项目: 国家自然科学基金项目(50574070);湖北省自然科学基金项目(2004ABA002)

作者简介: 刘白雁(1957-),男,江西宜春人,教授,主要研究方向:复杂机电液系统测控理论与技术、钻井控制。

参考文献

[1] Ligrone A, Oppelt J, Calderoni A, et al. The fastest way to the bottom:straighthole drilling device-drilling concept, design considerations, and field experience[R]. SPE36826, 1996:115-126.
[2] 苏义脑, 李松林, 葛云华, 等.自动垂直钻井工具的设计及自动控制方法[J].石油学报, 2001, 22(4):87-91.
[3] 李松林, 苏义脑, 董海平.美国自动旋转导向钻井工具结构及特点[J].石油机械, 2000, 28(1):42-44.
[4] 章扬烈.钻柱运动学与动力学[M].北京:石油工业出版社, 2001:139-143.
[5] 管志川, 靳彦新, 王以法.直井底部钻柱运动状态的实验研究[J].石油学报, 2003, 24(6):102-106.
[6] 周浩敏, 王睿.测试信号处理技术[M].北京:北京航空航天大学出版社, 2004:227-262.