您好,欢迎来到中国测试科技资讯平台!

首页> 《中国测试》期刊 >本期导读>二维光幕破片动能测试系统设计

二维光幕破片动能测试系统设计

2785    2016-09-18

免费

全文售价

作者:张虎威1,2, 李锦明1,2, 高文刚1,2, 郭淳1,2

作者单位:1. 中北大学 电子测试国家重点实验室, 山西 太原 030051;
2. 中北大学 仪器科学与动态测试教育部重点实验室, 山西 太原 030051


关键词:破片动能;二维光幕;现场可编程门阵列;非旋转对称


摘要:

针对飞行破片目标多、速度快、体积小以及测试环境中光强高、电磁干扰强的测试难点,设计一种非接触式的二维光幕破片动能测试系统。系统以现场可编程门阵列(FPGA)作为核心控制器,利用高精度ADC与NAND Flash存储器采集并存储相互正交的光幕传感器的输出信号,并将数据通过USB接口回读到上位机进行分析,提取出破片的速度与体积信息,进而得到破片的动能。最后通过气枪弹实验对系统进行测试,结果表明:该方案解决传统一维光幕测试系统只能测量旋转对称破片动能的问题,利用二维正交光幕有效地测量非旋转对称破片的动能信息,具有一定的实用价值和应用前景。


Design of two-dimensional screen fragment kinetic energy measurement system

ZHANG Huwei1,2, LI Jinming1,2, GAO Wen'gang1,2, GUO Chun1,2

1. National Key Laboratory for Electronic Measurement Technology, North University of China, Taiyuan 030051, China;
2. Key Laboratory of Instrumentation Science and Dynamic Measurement of Ministry of Education, North University of China, Taiyuan 030051, China

Abstract: Aiming at the difficulties of multi-target, high speed, small volume for flying fragments and high luminous intensity, strong electromagnetic interference in measurement environment, a non-contact two-dimensional screen fragment kinetic energy measurement system is designed. The system takes FPGA as the core controller, making use of high precision ADC and NAND Flash memory chip to acquire and store signal from mutually orthogonal screen senor, and reading the data back to the host computer for analysis through the USB interface, which extract the fragment velocity and volume information, then acquire the information of the kinetic energy of fragments. Based on the air-gun projectile impacting experiment,the results show that this scheme use two-dimensional orthogonal screen to measure kinetic information of non-rotational symmetry fragment effectively, which solves the issues that the traditional one-dimensional screen measurement system can only measure rotational symmetry fragment kinetic energy, and the system has a certain practical value and application prospect.

Keywords: fragment kinetic;two-dimensional screen;FPGA;non-rotational symmetry

2016, 42(8): 93-97  收稿日期: 2015-12-21;收到修改稿日期: 2016-1-30

基金项目: 

作者简介: 张虎威(1991-),男,山西太原市人,硕士研究生,专业方向为测试计量技术、数字信号处理。

参考文献

[1] 余庆波,刘宗伟,金学科,等. 活性破片战斗部威力评价方法[J]. 北京理工大学学报,2012(7):661-664.
[2] CHUNG KIM YUEN S, LANGDON G S, NURICK G N,et al. Response of V-shape plates to localised blast load: experiments and numerical simulation[J]. International Journal of Impact Engineering,2012(46):97-109.
[3] CHENG D S, HUNG C W, PI S J. Numerical simulation of near-field explosion[J]. journal of Applied Science and Engineering,2013,16(1):61-67.
[4] 黄经伟. 破片式战斗部破片规律及破片对步兵战车的侵彻作用研究[D]. 南京:南京理工大学,2014.
[5] 李翰山,雷志勇,王泽民. 两种天幕靶光幕交汇立靶测量系统分析[J]. 弹道学报,2010(1):29-32.
[6] 田会,倪晋平. 一体化结构四组合光幕阵列测量研究[J]. 仪器仪表学报,2014(2):320-326.
[7] 倪晋平,杨雷,田会. 基于大靶面光幕靶的两类六光幕阵列测量原理[J]. 光电工程,2008(2):6-11.
[8] 李翰山,雷志勇,袁朝辉. 立靶光幕探测性能分析与弹丸信息提取研究[J]. 计算机测量与控制,2010(8):1831-1833.
[9] ZHAO D E, ZHOU H C, LIU J, et al. High-precision velocity measuring system for projectiles based on retroreflective laser screen[J]. Optik-International Journal for Light and Electron Optics,2013,124(6):544-548.
[10] 侯锦亮,陈友兴,焦宗平,等. 激光复合光幕靶测速系统设计[J]. 弹箭与制导学报,2015(1):181-184.
[11] WANG L X, SONG W, LU C. Implementation of high speed real time data acquisition and transfer system[C]//4th IEEE Conference on Digital Industrial Electronics and Applications,2009:382-386.
[12] WANG Z S, YIN T Y, YING T H. Impact of memories from passivation on endurance and retention of NAND Flash memory[J]. IEEE Transactions on Electron Devices,2013,60(1):254-259.
[13] 田会,倪晋平,李亚胜. 测速光幕靶用数字信号处理算法[J]. 应用光学,2012(3):542-547.