作者：高波, 彭刚, 冯家臣, 王绪财, 王伟, 陈春晓

作者单位：中国兵器工业集团第五三研究所, 山东 济南 250031

关键词：本构关系;参数标定;Johnson-Cook模型;聚甲醛;密胺树脂

摘要：

通过两种工程塑料不同温度条件下的准静态和动态压缩试验，研究这两种工程塑料的应力应变特性。同时，为描述所研究聚合物在高温、高应变率下的应力-应变特性，基于Johnson-Cook本构模型，建立一种形式简洁、便于参数拟合的聚合物本构模型。分别利用聚甲醛和密胺树脂在准静态下和高应变率条件下的真应力-真应变曲线，对模型进行参数拟合和标定，结果表明：在高温、高应变率条件下，模型可以预测到5%应变以前的应力-应变关系，与聚合物力学性质符合率良好。

The constitutive relation of polymer research in the range of infinitesimal strain

GAO Bo, PENG Gang, FENG Jiachen, WANG Xucai, WANG Wei, CHEN Chunxiao

Institute 53 of China Ordnance Industry Group, Ji'nan 250031, China

Abstract: The stress-strain characteristics of poly formaldehyde and melamine resin are investigated by quasi-static and dynamic compression experiments.In the meantime,in order to describe the dynamic compression mechanical properties of the polymer,a type of polymer constitutive model which is simple in form and easy for parameter fitting,was proposed based on Johnson-Cook constitutive model.The true stress-true strain curves of poly formaldehyde and melamine resin under the condition of quasi-static and high strain rate were used for parameter fitting and to calibrate the new model.The results show that under the condition of high temperature as well as high strain rate,the new model can predict the stress-strain relationship before strain reaches 5%.The coincidence rate of the model and the polymer mechanical properties are good.

Keywords: constitutive relation;parameters calibration;Johnson-Cook model;poly formaldehyde;melamine resin

2016, 42(10): 119-122  收稿日期: 2016-4-25;收到修改稿日期: 2016-5-17

基金项目: 

作者简介: 高 波(1990-),男,山东泰安市人,助理工程师,研究方向为非金属材料动态力学性能测试。

参考文献

[1] 王礼立. 应力波基础[M]. 北京:国防工业出版社,2010:166-169.
[2] SIVIOUR C R, WALLEY S M, PROUD W G. The high strain rate compressive behavior of polycarbonate and pol yvinylidene difluoride[J]. Polymer,2005(43):12546-12555.
[3] HUANG M J. Elastic constants of a Polycrystal with an orthorhombic texture[J]. Mechanics of Materials,2004(36):623-632.
[4] JOHNSON G R, COOK W H. A constitutive model and data for metals subjected to large strains,high strain-rates and high temperatures[C]//Porc Seventh Int Nat Symposium on Ballistcs April,1983.
[5] SHEN L J. Constitute for isotropic or kinematic hardening at finite elastic-plastic deformation[J]. Int J Solids and Structures,2005(43):5613-5627.
[6] DROZDOV A D. Constitutive equations in finite elasticity of rubbers[J]. Int J Solids and Structure,2007(44):272-297.
[7] CHEN W, ZHOU B. Constitutive behavior of Epon 828/T-403 at various strain rates[J]. Mechanics of Time-Dependent Materials,1998(2):103-111.
[8] 沈玲燕,李永池,王志海,等. 三维E玻璃纤维复合材料压缩行为的应变率相关性实验研究[J]. 防护工程,2010, 32(2):48-52.
[9] 柳和生,涂志刚,熊洪槐. 聚合物熔体粘弹性本构方程[J].高分子材料科学与工程,2002(1):22-25.
[10] SUN C T. 张帆,译. 复合材料的非弹性性能[M]. 北京:科学出版社,1999.
[11] RICHETON J, AHZI S, VECCHIO K S, et al. Adharapurapu Influence of temperature and strain rate on the mechanical behavior of three amorphous polymers:Characterization and modeling of the compressive yield stress[J]. International Journal of Solids and Structures,2006(43):23l8-2335.
[12] TRAUTMANN A, SIVIOUR C R, WALLEY S M, et al. Lubrication of polycarbonate at cryogenic temperatures in the split Hopkinson pressure bar[J]. International Journal of Impacting Engineering,2005(31):523-544.