作者：张庆军, 李丽丹, 何钊

作者单位：四川九洲电器集团有限责任公司, 四川 绵阳 621000

关键词：流体力学;阻力特性;风道;强迫风冷

摘要：

强迫风冷设计中不当的风扇型号将导致电子设备的高温失效或不可逆损坏，而风扇型号的选取则直接由系统的阻力特性所决定，因此阻力特性曲线的确定成为强迫风冷设计的关键步骤。为准确、便捷地得到系统阻力特性曲线，基于风道特性测试理论搭建一套风道阻力特性测试系统，通过测量流经系统的空气流量及对应的压力损失得到系统的阻力系数，为风扇的型号选取提供依据。利用该测试系统测量多种分布形式机箱的阻力特性，结合理论和实验结果分析影响风道阻力特性的因素，总结其对阻力系数的影响关系和具体原理，为强迫风冷的风道设计提供参考。

The study on testing technology of wind tunnel property based on forced air cooling

ZHANG Qingjun, LI Lidan, HE Zhao

Sichuan Jiuzhou Electric Group Co., Ltd., Mianyang 621000, China

Abstract: Improper fan will lead to high-temperature failure and irreversible damage of electronic devices in forced air cooling, and the type of fan is directly determined by the resistance characteristics of the system, therefore the calculation of resistance characteristics curve becomes a crucial step in the design of forced air cooling. In order to get the resistance characteristic curve of the electronic device accurately, easily and quickly, a system based on the testing theory of wind tunnel characteristic has been built in this paper. By measuring the volume of air flow through the system with the corresponding pressure loss can help us to obtain the curve of the device which can be used to select the appropriate fan. The paper also measured the resistance characteristics of various chassis by using this testing system and made analysis on the factors which have effect on the curve combine with the theoretical. In the end, the thesis makes a summary of the relationship between the factors and the drag coefficient which can provide the reference information for structure designers in duct design of forced air cooling.

Keywords: fluid dynamics;resistance characteristics;wind tunnel;air forced cooling

2017, 43(1): 140-144  收稿日期: 2016-06-10;收到修改稿日期: 2016-08-02

基金项目: 

作者简介: 张庆军(1973-),男,四川绵阳市人,高级工程师,硕士,主要从事电子设备结构设计。

参考文献

[1] 卢锡铭. 电子设备热仿真热测试技术研究[J]. 船舶电子对抗,2013,36(3):118-120.
[2] 李业,周水清,王军,等. 转速对弯掠轴流风机气动噪声的影响分析[J]. 工程热物理学报,2014,35(1):51-55.
[3] 张忠海. 电子设备中高功率器件的强迫风冷散热设计[J].电子机械工程,2005,21(3):18-21.
[4] DAVE S S. 电子设备冷却技术[M]. 2版. 李明锁,丁其伯,译. 北京:航空工业出版社,2012:122-127.
[5] 严雅婧,孟晶悦,张龙. 大型矿用挖掘机风道压力损失的计算[J]. 机械管理开发,2014,138(2):59-61.
[6] 王有锋,姜武,张辉,等. 电厂烟风道异型件阻力系数的数值计算方法[J]. 电力科学与工程,2006(3):47-49.
[7] 杨世铭,陶文铨. 传热学[M]. 3版. 北京:高等教育出版社,1998:424.
[8] 陈杰瑢,李尊朝,程刚. 风道压力损失与分支风道压力平衡计算的程序设计[J]. 西北纺织工学院学报,1995,9(1):28-30.
[9] 邓彩华,童亮,陈壁峰,等. 多孔介质流动的直接数值模拟[J]. 武汉理工大学学报(交通科学与工程版),2011,35(6):1257-1260.
[10] 王奉明,张靖周,王锁芳. 扰流柱形状对流动换热特性影响的数值研究[J]. 南京师范大学学报(工程技术版),2005, 5(2):7-30.