作者：赵兴华^1,2, 蔡力勋², 徐尹杰¹, 唐韵¹

作者单位：1. 中国测试技术研究院, 四川 成都 610021;
2. 西南交通大学力学与工程学院 应用力学与结构安全四川省重点实验室, 四川 成都 610031

关键词：C250马氏体钢;漏斗试样;扭转低周疲劳;寿命预测;S-N曲线

摘要：

针对传统圆棒试样扭转低周疲劳存在的问题，采用漏斗形试样对材料C250马氏体钢（Cr强化）进行4种温度（20，150，200，350℃）、两种应变幅比（-1、0.1）下的扭转低周疲劳试验，得到一系列S-N曲线。对比分析Manson-Coffin模型、拉伸滞后能损伤模型以及三参数幂函数模型3种低周疲劳寿命预测模型，评述其基本假设、应用范围和特点。应用3种模型分别对上述8种工况的试验结果进行寿命预测对比分析，并对比分析温度对扭转低周疲劳寿命的影响。结果显示：三参数幂函数公式能更好地拟合试验结果，明显克服另外两种预测模型的缺陷。因此，对于扭转低周疲劳寿命的预测宜采用三参数幂函数模型，其预测结果更接近真实值。

Research of life prediction method for torsional low cycle fatigue on funnel specimens

ZHAO Xinghua^1,2, CAI Lixun², XU Yinjie¹, TANG Yun¹

1. National Institute of Measurement and Testing Technology, Chengdu 610021, China;
2. Applied Mechanics and Structure Safety Key Laboratory of Sichuan Province, School of Mechanics and Engineering, Southwest Jiaotong University, Chengdu 610031, China

Abstract: To solve the problem of torsional low cycle fatigue in traditional round bar specimens, the funnel-type specimens of C250 maraging steel were adopted for the torsional low cycle fatigue test under four kinds of temperature(20,150,200,350℃) and two kinds of strain amplitude ratio (-1 & 0.1). Based on tests, a series of S-N curves were obtained. Comparing with Manson-Coffin model, stretching hysteresis energy damage model and three-parameters power model, characteristics and application scope of different prediction methods were summarized in the present study. Eight kinds of test conditions were compared by using of the above three kinds of models. Then, the effects of temperature to torsional low cycle fatigue life were discussed. Results show that three-parameters power model can better fitting the test results, the prediction model can remove the disadvantages of the other two kinds of prediction models obviously. Therefore, it is appropriate that the torsional low cycle fatigue life prediction using three-parameters power model and the prediction more accurately.

Keywords: C250 maraging steel;funnel-type specimens;torsional low cycle fatigue;life prediction;S-N curve

2017, 43(7): 20-24,29  收稿日期: 2016-12-09;收到修改稿日期: 2017-02-03

基金项目: 国家自然科学基金项目（11472228）

作者简介: 赵兴华(1988-),男,山东泰安市人,工程师,硕士,主要从事疲劳与断裂力学方面的研究。

参考文献

[1] 赵兴华,蔡力勋,包陈,等. 基于漏斗试样的C250钢高温扭转低周疲劳行为[J]. 航空学报,2016,37(2):617-625.
[2] COFFIN L F, WESLEY R P. An apparatus for the study of the effects of cyclic thermal stresses on ductile metals[R]. Knolls Atomic Power Lab,1952.
[3] MANSON S S. Behavior of materials under conditions of thermal stress[R]. Ohio:Lewis Flight Propulsion Laboratory, 1975.
[4] RAO M N. Progress in understanding the metallurgy of 18% nickel maraging steels[J]. Zeitschrift für Metallk-unde,2006,97(11):1594-1607.
[5] 方明敏. 18Ni(350)马氏体时效钢力学性能及强韧化机制的研究[D]. 扬州:扬州大学,2014.
[6] 尹航,李金许,宿彦京,等. 马氏体时效钢的研究现状与发展[J]. 钢铁研究学报,2014,26(3):1-4.
[7] MCCLAFLIN D, FATEMI A. Torsional deformation and fatigue of hardened steel including mean stress and stress gradient effects[J]. International Journal of Fatigue, 2004,26(7):773-784.
[8] SHAMSAEI N, FATEMI A. Deformation and fatigue behaviors of case-hardened steels in torsion:experiments and predictions[J]. International Journal of Fatigue,2009,31(8):1386-1396.
[9] 郑飞,何玉怀,苏彬. 低周疲劳寿命预测模型分析[J]. 实验室研究与探索,2007,26(10):189-191.
[10] OSTERGREN W J. A damage function and associated failure equations for predicting hold time and frequency effects in elevated temperature, low cycle fatigue[J]. ASTM Journal of Testing and Evaluation,1976,4(5):327-339.
[11] 张国栋,苏彬. 高温低周应变疲劳的三参数幂函数能量方法研究[J]. 航空学报,2007,28(2):314-318.
[12] 陈立杰,冮铁强,谢里阳. 应用幂变换法构造低周疲劳寿命预测的幂指函数模型[J]. 航空学报,2006,27(2):267-271.
[13] 傅惠民. ε-N曲线三参数幂函数公式[J]. 航空学报,1993,14(3):173-176.