作者：丁晨, 乔玉娥, 刘岩, 翟玉卫, 郑世棋

作者单位：中国电子科技集团公司第十三研究所, 河北 石家庄 050051

关键词：在片测试系统;校准;薄膜溅射法;电阻标准件;短路器

摘要：

为解决在片测试系统中1~1000 Ω电阻无法进行整体校准问题，通过采用GaAs材料作为衬底，利用半导体工艺中薄膜溅射法，使用轰击离子Ar⁺与靶材作用形成反应层，激发出的溅射原子NiCr打至GaAs表面，制作薄膜电阻。采用方块电阻为50 Ω/块，通过调节长与宽的比值，研制出1~1 000 Ω电阻标准件。为消除电阻测量过程中芯片内部回路引线的影响，研制出相对应的短路器。通过组建具有温度控制系统的定标装置，在-40~100 ℃温度下对标准件进行定标，定标结果表明电阻标准件的阻值与温度具有良好的线性关系，短期重复性RSD优于0.05%，年稳定性RSD优于0.1%，可以有效解决现有在片测试系统低值电阻参数的整体校准问题。

Resistance standard parts for calibration of on-wafer test system
DING Chen, QIAO Yu'e, LIU Yan, ZHAI Yuwei, ZHENG Shiqi
The 13th Research Institute of China Electronics Technology Group Corporation, Shijiazhuang 050051, China
Abstract: Resistance standard parts were developed in order to solve the problem that the resistance parameter of on-wafer test system can not to be calibrated in range of 1~1000 Ω. The standard parts were fabricated by thin-film sputtering method, which build thin-film resistor on GaAs substrate. The thin-film resistor was made by NiCr. Reaction layers were formed by Ar⁺ ion-bombardment, and the sputtered Ni and Cr atoms hit the GaAs surface. The standard parts in range of 1~1 000 Ω were developed, using square resistance of 50 Ω, by adjusting the ratio of length to width. Considering that the wire in chip internal loop could influence the resistance measurement, short devices were developed. A calibrating system with temperature control function was established, which could calibrate the standard parts between -40-100 ℃. The calibration results show good linearity relationship between standards resistance value and temperature. The short-term repeatability RSD of the standards was better than 0.05%, while annual stability RSD was better than 0.1%. The resistance standards could carry out effective calibration of resistance parameter for on-wafer test systems.
Keywords: on-wafer test system;calibration;thin-film sputtering;resistance standard part;short device
2019, 45(7):97-101,116  收稿日期: 2018-10-10;收到修改稿日期: 2018-12-03
基金项目:
作者简介: 丁晨(1991-),男,河北石家庄市人,助理工程师,主要从事电磁仪器计量技术研究
参考文献
[1] 乔玉娥, 刘岩, 程晓辉, 等. MEMS晶圆级测试系统现状及未来发展[J]. 传感器与微系统, 2016, 35(10):1-3
[2] 丁晨, 乔玉娥, 丁立强, 等. MEMS在片测试系统整体校准技术探讨[C].//2015国防计量与测试学术交流会, 2015.
[3] 乔玉娥, 刘岩, 丁晨, 等. MEMS片上绝缘性能测试高阻标准件研制[J]. 中国测试, 2017, 43(7):88-91
[4] 丁晨, 乔玉娥, 刘岩. MEMS在片测试系统电容参数校准技术研究[J]. 中国计量, 2016(12):94-96
[5] CASCADE MICROTECH. Impedance Standard Substrate Map[EB/OL].[2017-10-05]. https://www.formfactor.com.
[6] QUIRK M. 半导体制造技术[M]. 韩郑生, 等, 译. 北京:电子工业出版社, 2015:6.
[7] 杨士慧, 徐向前, 田红林, 等. 离子注入掺杂工艺研究[J]. 智能电网, 2017, 5(8):748-751
[8] PIERRET R F. 半导体器件基础[M]. 黄如, 等, 译. 北京:电子工业出版社, 2004:11.
[9] WANG C, KIM N Y. Optimization of NiCr Thin Film Resistor on Semi-insulating-GaAs Substrate in Advanced Integrated Passive Device Process[J]. IETE Journal of Research, 2012, 58(4):279-283
[10] KWON Y, KIM N H, PYO G, et al. Structural and surface properties of NiCr thin films prepared by DC magnetron sputtering under variation of annealing conditions[J]. Microelectronic engineering, 2005, 3(4):314-320
[11] 张丽娟, 王芳, 孙承松, 等. 高稳定Ni-Cr薄膜电阻的研究[J]. 微处理机, 2005, 26(4):7-8
[12] 张渊. 半导体制造工艺[M]. 北京:机械工业出版社, 2015:8.
[13] LEE J S, VESCAN A, WIE A, et al. Characteristics of AlGaN/GaN HEMT devices with SiN passivation[C]//International Electron Devices Meeting, 2000.
[14] RAMBO C, SIEBER H. Novel Synthetic Route to Biomorphic Al2O3 Ceramics[J]. Cheminform, 2010, 36(26):1088-1091
[15] 任丽英. 测定金属电阻温度系数的方法研究[J]. 大学物理实验, 2010, 23(5):7-9
[16] 陈峦, 唐毅. 电阻温度系数测试系统[J]. 轻工科技, 2008, 24(1):27-29